Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
When the volume is turned all the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit. Clock and Timer To Set Clock: • When the battery is first plugged in, the clock will beep and a few seconds later blink "7 2.-00". • To set the hours, push the S1 button to the desired time. A small "PM" will appear on the left side of the window to designate "pm". • To set the minutes, push the S2 button to the desired time. • Once the correct time is displayed in the window, push the S3 button to start the clock. To Change the time: • To change the time push the S3 button and hold it down for 5 seconds. Repeat the steps above to change the time. Push S3 to start the clock. Timer Feature: To Count UP from 0 (up to 19 hours and 59 minutes): • Press both S1 and S2 buttons at the same time. The display will be "0.00". • Press the S3 button. The word "UP" will appear on the upper right side of the window and the timer will start to count up. • To stop the timer push S3 again. You may stop and start the timer by pressing the S3 button. • To reset the timer to "0.00", press both the S1 and S2 buttons at the same time. • If you want to view the clock time while in count up mode, press and hold the S1 button. Releasing the button will display the counter again. • To return to the clock, Push S1, S2 and S3 at the same time. To set the alarm for a specific amount of time (up to 19 hours and 59 minutes): • Press both S1 and S2 at the same time. The display will be "0.00". • Press the S1 button to set the hours up to 19 hours. • Press the S2 button to set the minutes up to 59 minutes. • Press the S3 button. The word "DOWN" will appear in the lower right corner of the window and the colon will blink. • When the alarm sounds press the S3 button to stop the beep. • To reset the alarm to "0.00" press the S1 and S2 buttons at the same time. • If you want to view the clock time while in count down mode, press and hold the S1 button. Releasing the button will display the counter again. • To return to the clock, Push S1, S2 and S3 at the same time. 5 To Record a Message To Record a Message • Turn the Nursery Unit on and set to the desired sound level. • Slide the "ON/OFF Sensitivity Selector" button on the back of the Nursery Unit to "OFF" and the "Record/Melody Selector" button on the top of the Nursery Unit to "RECORD". • Push and hold the "RECORD" button on the back of the Nursery Unit. Record a message up to 15 seconds long. Release the button when you are done. When the unit beeps, the record time has ended. To Play back the Message or a Chosen Melody Your Nursery Unit is equiped with a sensor that will trigger the unit to play either the message or one melody if the volume of noise around the unit is sufficient to trigger the sensor. There are two settings. When the "ON/OFF Sensitivity Selector" button on the back of the Nursery Unit is switched to the "LOW" setting, the sensor will detect low sounds near the Nursery Unit and will trigger the unit to play the message or one melody. The "HIGH" setting will detect only the higher sounds near the Nursery Unit and trigger the unit to play the message or one melody. • Turn the Nursery Unit on and set to the desired sound level. • Slide the "Record/Melody Selector" button on the top of the Nursery Unit to "RECORD". • Slide the "ON/OFF Sensitivity Selector" button on the back of the Nursery Unit to "LOW" or "HIGH". • The "Record/Melody Selector" button on the top of the Nursery Unit can also be set to the "MELODY" setting. If the sensor detects sound, the unit will play one melody and then turn off. If the sound near the Nursery Unit continues, the unit will play the next melody. This will continue as long as the sensor detects the sound. Music • To play music, slide the "ON/OFF Sensitivity Selector" button on the back of the Nursery Unit to "OFF" and the "Record/Melody Selector" button on the top of the Nursery Unit to "MELODY". • Press the "PLAY" button no the back of the Nursery Unit. One of four tunes will begin to play. To select a specific tune, push the "PLAY" button until the desired tune is on. The Nursery Unit will play one song and then shut off automatically. 6 TroubleShooting DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the operator's authority to operate the equipment. Most problems have a simple solution. First, check that: • Power is turned ON for both units • Both units are plugged in (or batteries are recharged in Parent Unit) • Electrical outlet works • Volume is turned up on Parent Unit • Parent Unit is in range of the Nursery Unit No Sound • Battery dead or weak — recharge battery or use AC adapter. • AC adapter not properly connected — check the connections. • Nursery Unit covered or blocked — remove the obstruction. Weak Sound • Nursery Unit too far from baby — move closer. • Large objects blocking the...