Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
From now on you can enjoy the perfect taste of a draft beer at home. The system will keep your beer fresh and at exactly the right temperature so that you can always enjoy nice and cool draft beer. Once the PerfectDraft has been installed, you can pour beer at home by just pulling the tap handle. Several beer brands are available for this system.You can find the beer brands available in your countr y on the box of the PerfectDraft system (also see chapter 'Keg suppliers' at the end of these instructions for use).You can visit our website at for more information. The PerfectDraft system is meant for home use only. It is not suitable for professional use. These instructions for use tell you how to use the PerfectDraft. B Because the name of this appliance is PerfectDraft, we use 'draft beer' instead of 'draught beer' in these instructions for use. Appliance A Right door B Left door C Display: indicates beer temperature & beer level D Release button E Drip tray cover F Drip tray G Cord storage facility H Cooling plate I Locking levers J Keg sensor Tap unit K Medaillon L Tap handle M Tap body N Spout O Release buttons P Tube Q Tube connector R Tube release button Keg S Chimes T Protection cap U Connection top ENGLISH Important C C Read these instructions for use carefully before using the appliance and save them for future reference. The appliance . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Check if the voltage indicated on the bottom of the appliance corresponds to the local mains voltage before you connect the appliance. . Do not use the appliance when the mains cord, the plug or the appliance itself is damaged. . Keep the appliance out of the reach of children.The handle can be removed for extra safety. . Put the appliance on a horizontal, even and stable surface, leaving at least 10 cm free space behind and on both sides of the appliance for the best performance. . We advise you to put the appliance in an environment with an ambient temperature between 3 and 25cC. . When you use the appliance at an ambient temperature above 25cC, the beer temperature indicated on the display may rise to above 3cC.When the ambient temperature decreases to below 25cC, the beer temperature will drop to 3cC again. At higher ambient temperatures chilling the keg will also take longer. . Do not expose the appliance and the keg to direct sunlight or to temperatures higher than 30cC. . Always clean the appliance before you store it for a longer period. . Do not lift the appliance by means of the tap handle. . Do not cover the appliance (e.g. with a towel) to prevent it from overheating. The keg . Always read and follow the instructions and safety warnings on the keg before installing it in the appliance. . Do not shake the keg. . Store an open keg at the right temperature by leaving it in the appliance. Make sure the appliance is switched on. If you switch the appliance off because you are not going to use it for a longer period (e.g. a holiday), always remove the open keg from the appliance and put it in the fridge. Once a keg has been opened, the beer stays fresh for 28 days. . Never store the keg in the freezer! Freezing may cause serious damage to the keg. . To avoid the risk of explosion, do not expose the keg to direct sunlight or temperatures higher than 30cC. . Always check the sell-by date on the keg at purchase before installing it. . Do not use the keg if the connection top is damaged. If the connection top is damaged, the tap unit will not fit onto it. . Unopened kegs will keep best when stored at a stable temperature.The cooler you store the keg, the better. . The keg is under pressure. Do not remove the connection top or pierce the keg with a sharp object. . Maximum working pressure: 1.5 bar. . Use the keg only for the HD3600 PerfectDraft. Do not connect other equipment to the keg. . Do not use kegs from other suppliers than the ones mentioned in these instructions for use (see chapter 'Keg suppliers' at the end of these instructions for use). . Do not use damaged kegs in this appliance, as this could harm the appliance.A damaged keg should be immediately returned to the shop where it was bought. . The kegs are not stackable. Preparing for use Step 1: installing the appliance 1 Put the appliance on a horizontal, even and stable surface, leaving at least 10 cm free space behind and on both sides of the appliance for the best performance. B Do not put the appliance in a place where it will be exposed to direct sunlight or to high temperatures (e.g. close to a cooker or an oven). C 2 You can store excess cord by pushing it into the storage compartment at the back of the appliance. 3 Insert the plug into the wall socket. C 4 Install the drip tray. C 5 Attach the tap handle. 8 ENGLISH ENGLISH 6 Place the preferred medallion on top of the handle. C Step 2: placing the tap unit onto the...