Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
NOTE: .A11 connections must be in accordance ivith local plumbing codes, DISPOSER INSTALLATION / 1. Be sure the isolating splash guard (8) is in place. Lift disposer and engage hooh (7) onto support plate (4), then engage hook (11) onto support plate (4). Turn disposer to align with drain trap. Snap lever (10) downward to lock. 2. Connect the drain trap to the spout (9). If necessary. pry lever (10) outward and turn disposer for better alignment. 3. Connect the dishwasher drain hose to the disposer inlet (13) with a hose clamp (where applicable). 4. Check to assure that the grinding chamber is clean of any foreign objects and tire flywheel is free to rotate, Place the cover in position and fill the sink at least three inches deep. Remove the cover and, as the water drains. chech all con nections for leaks TYPICAL INSTALLATIONS Height of drain must not exceed height of disposer discharge opening. Typical “P” Trap Connection Connection With Straight-Away Drain Spout WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AT THE FUSE/ CIRCUIT BREAKER BOX BEFORE MAKING ELECTRICAL CONNECTIONS. Follow the National Electrical Code and/or your local electrical code in all details. In older houses with limited circuits, or if it appears the circuit is heavily loaded, run a line directly to the main fuse box. 1. Remove the electrical access cover on the bearing bracket assembly. 1,. Install standard strain relief connector (not furnished) into threaded opening in bearing bracket assembly. 3. Install the control switch where it is easily accessible for the owner. Recom- mended: On-Off switch suitable for operation of l/2 HP. motor. (Switch not furnished). 4. Run flexible conduit. or equivalent, from the control switch to the disposer motor leads located in the bearing bracket assembly. Connect unit to ground (See illustration and grounding instructions below). 5. Press wires into the electrical access compartment and replace cover. 6. Run flexible conduit, or equivalent, from the control switch to the electrical power supply. Insulate all connections. GROUNDING INSTRUCTIONS (Cord -Connected Units) This appliance must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment gloundmg conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER: Improper connection of the equipment-grounding conductor can re- sult in a risk of electric shock, Check with a qualified electrician or serviceman if you are in doubt as to whether the applicance is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDING INSTRUCTIONS (Permanent -Connected Units) This appliance niust be coniie~red to 3 ~...
Эта инструкция также подходит к моделям:Прочая кухонная техника - KD-100 (169.94 kb)
Прочая кухонная техника - KWC=200B (169.94 kb)