Оценок - 3, средний балл: 4.3 ( )

Производитель: Vulcan-Hart Размер: 986.1 kb Название файла: Язык инструкции:

WARNING IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION OR MODIFICATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. IN THE EVENT OF A POWER FAILURE, DO NOT ATTEMPT TO OPERATE THIS DEVICE. — 2 — TABLE OF CONTENTS Important safety information page 2 Codes and standards information page 3 Manual use information page 3 Data plate information page 3 Tools required for servicing page 3 General appliance information age 3 Section l Service Checks and Adjustments page 4-5 Section ll Removal of Service Parts page 6-10 Section lll Trouble Shooting page 11 CODES AND STANDARDS Vulcan-Hart Cheese Melters are to be installed in accordance with state and local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI-Z223.1 (latest edition), available from the American Gas Association, Inc., 1515 Wilson Blvd., Arlington, Va. 22209 and with ANSI-NFPA Standard #96 (latest edition), Vapor Removal From Cooking Equipment, available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. For this appliance, clearance from combustible construction must be a minimum of 6" from the sides, 0" from the back, and 4" from a counter top. There is no minimum clearance from noncombustible construction. HOW TO USE THIS MANUAL This manual is dedicated to the servicing of the Vulcan-Hart Co. ICM24,36,48,60 and 72 Cheese Melter. The manual is divided into 3 sections, CHECKS AND ADJUSTMENTS, REMOVAL OF SERVICE PARTS AND TROUBLE SHOOTING. For additional technical assistance refer to the service assistance number on the front cover of this manual. Refer to parts manual to identify service replacement parts. DATA PLATE The data plate which identifies the appliance model no., device no., serial no., gas specification and agency approvals is located on the appliance front cover in lower right corner. TOOLS REQUIRED Tools required to preform the service operations covered in this manual. 1. Standard set of hand tools. 2. Temperature tester (thermocouple or digital pyrometer). 3. Gas test kit. GENERAL APPLIANCE INFORMATION ICM24 is a 24" wide unit appliance (1) 20,000 BTU/HR burner. ICM36 is a 36" wide appliance using (1) 30,000 BTU/HR burner. ICM48 is a 48" wide appliance using (2) 20,000 BTU/HR burners. ICM60 is a 60" wide appliance using (1) 20,000 and (1) 30,000 BTU/HR burners. ICM72 is a 72" wide appliance using (2) 30,000 BTU/HR burners. The 20,000 BTU burner is 15" long and the 30,000 BTU burner is 27" long. The appliance manifold pressure is 5" W.C. for natural gas and 10" W.C. for propane gas. — 3 — SECTION I SERVICE CHECKS AND ADJUSTMENTS WARNING: SHUT OFF GAS BEFORE SERVICING VENTILATION CHECKS Insure that adequate ventilation has been provided in accordance to all codes as stated on page 3 of this manual. The vent for this appliance should be checked for restrictions every 6 months. GAS SU...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: