Оценок - 4, средний балл: 4.3 ( )

Производитель: Alto-Shaam Размер: 2.05 mb Название файла: Язык инструкции:

Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier. See Transportation Damage and Claims section located in this manual. This appliance, complete with unattached items and accessories, may have been delivered in one or more packages. Check to ensure that all standard items and options have been received with each model as ordered. Save all the information and instructions packed with the appliance. Complete and return the warranty card to the factory as soon as possible to ensure prompt service in the event of a warranty parts and labor claim. This manual must be read and understood by all people using or installing the equipment model. Contact the Alto-Shaam Tech Team Service Department if you have any questions concerning installation, operation, or maintenance. NOte: All claims for warranty must include the full model number and serial number of the unit. uNPACkiNG 1. Carefully remove the appliance from the carton or crate. NOte: Do not discard the carton and other packaging material until you have inspected the unit for hidden damage and tested it for proper operation. 2. Read all instructions in this manual carefully before initiating the installation of this appliance. DO NOT DISCARD THIS MANUAL. This manual is considered to be part of the appliance and is to be provided to the owner or manager of the business or to the person responsible for training operators. Additional manuals are available from the Alto-Shaam Tech Team Service Department. 3. Remove all protective plastic film, packaging materials, and accessories from the appliance before connecting electrical power. Store any accessories in a convenient place for future use. HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 1 sAFety PROCeDuRes AND PReCAutiONs AND PReCAutiONs Knowledge of proper procedures is essential to the 1. This appliance is intended to hold foods safe operation of electrically and/or gas energized for the purpose of human consumption. equipment. In accordance with generally accepted No other use for this appliance is authorized product safety labeling guidelines for potential or recommended. hazards, the following signal words and symbols 2. This appliance is intended for use in commercial may be used throughout this manual. establishments where all operators are familiar with the purpose, limitations, and associated hazards of this appliance. Operating instructions and warnings must be read and understood by all operators and users. 3. Any troubleshooting guides, component views, and parts lists included in this manual are for general reference only and are intended for use by qualified technical personnel. 4. This manual should be considered a permanent part of this appliance. This manual and all supplied instructions, diagrams, schematics, parts lists, notices, and labels must remain with the appliance if the item is sold or moved to another location. DANGeR Used to indicate the presence of a hazard that WILL cause severe personal injury, death, or substantial property damage if the warning included with this symbol is ignored. WARNiNG Used to indicate the presence of a hazard that CAN cause personal injury, possible death, or major property damage if the warning included with this symbol is ignored. CAutiON Used to indicate the presence of a hazard that can or will cause minor or moderate personal injury or property damage if the warning included with this symbol is ignored. NOte For equipment delivered for use in any location regulated by the following directive: DO NOT DISPOSE OF ELECTRICAL OR ELECTRONIC EQUIPMENT WITH OTHER MUNICIPAL WASTE. CAutiON Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored. NOte: Used to notify personnel of installation, operation, or maintenance information that is important but not hazard related. HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 2 site iNstALLAtiON iNstALLAtiON site iNstALLAtiON In order to maintain established National Sanitation Foundation standards, all stationaryfloor models must be sealed to the floor with a R.T.V. or silastic meetingN.S.F. requirements orhave 6" (153mm) unobstructed clearance beneath the unit. 1. The appliance must beinstalled on a stable and level surface. 2. DO NOT install this appliance in any areawhere it may be affected by any adverseA number of adjustments are associated with initial i...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: