Оценок - 1, средний балл: 4 ( )

Производитель: APW Wyott Размер: 792.94 kb Название файла: Язык инструкции:

Check circuit breaker. 3. Is power switch on & pilot light glowing? 4. Check rating label. Are you operating unit on proper voltage? SPECIFICATIONS Description (Model #) Outside Dimensions Inside Dimensions Cut-Out Shipping WeightL W H L W H D W FullSize (HFW-1) 23” (54.4) 15” (38.1) 7 3/4” (19.7) 9 7/8” (50.5) 11 7/8” (30.2) 6 1/4” (15.9) 21 3/4” (55.2) 13 3/4” (34.9) 25 lbs (11.4 kg) 2/3 Size (HFW-23) 16” (40.6) 15” (38.1) 7 3/4” (19.7) 13” (33) 11 7/8” (30.2) 6 1/4” (15.9) 14 5/8” (37.1) 13 3/4” (34.9) 22 lbs (10 kg) 1/2 Size (HFW-12) 12 .” (30.5) 15” (38.1) 7 3/4” (19.7) 9 1/2” (24.1) 11 7/8” (30.2) 6 1/4” (15.9) 11 1/2” (29.2) 13 3/4” (34.9) 22 lbs (10 kg) NOTE: Top Flange 1 9/16” (3.9cm) all 4 sides, 4 corners 1” (2.5 cm) radius. Standard thermostat has 36” (91.4 cm) capillary effective length 26” (66 cm). CONTROL SIZE: 5 5/16” W x 6 7/16” H (13.5 x 13.8) CONTROL CUTOUT: 5 3/4” W x 6 1/4” H (14.6 x 15.8) 15” Outside Length = O 11 7/8” (30.2) Inside Length = I DRAIN (OPTIONAL) 0 = 23” (HFW-1) 16” (HFW-23) 12 1/2” (HFW-12) I = 19 7/8” (HFW-1) 13” (HFW-23) 9 1/2” (HFW-12) 7 3/4” (19.7 cm) 8 1/4” (15.9 cm) Recessed Bezel Cut-Out 6 1/4” (15.9) 5 3/4” (14.6) 3/8” Dia. (1.0) 3 OPTION SPECIFICATIONS Description Models w/Drains Drain Location Drain Couplings Thermostat Wood Mt Kit No’s Wood Mt Kit Cut-Out Full Size HFW-1D 1 11/16” x 1 11/16” . NPT 72” (182.8) 56431 23 7/8” x 15 7/8” (HFW-1) (4.3 x 4.3) from Stainless Capillary (60.6 x 40.3) back right corner 1 1/2” (3.8) Effective 2/3 SizeHFW-23D long Length 56460 16 5/8” x 15 7/8” (HFW-23) 62” (157.5) (42.2 x 40.3) 1/2 Size HFW-12D 56413 13 5/8” x 15 7/8” (HFW-12) (34.6 x 40.3) ELECTRICAL SPECIFICATIONS Description Rating at 120VAC, 1PH Rating at 208VAC, 1PH Rating at 208/240VAC, 1PH HFW-1 1500 Watts, 12.5 Amps 1660 Watts, 7.7 Amps 1200/1600 Watts, 5.7/6.7 Amps HFW-23 800 Watts, 6.7 Amps HFW-12 800 Watts, 6.7 Amps 500/660 Watts, 2.4/2.8 Amps INSTALLATION Installation: 1. Follow applicable General Installation Instructions on page 2. 2. Make applicable Cut-Out per above table. CONNECTION NOTE: Unit is designed for installation in stainless steel tops. Optional wood mounting kit available. 3. Apply putty tape (Provided) to the underside perimeter of the well rim outer edge. 4. Apply a 1/4" (.6 cm) bead of silicone sealant adjacent to the putty tape on the well flange. 5. Drop well into opening from the top and push down until entire parameter of rim is flush with the counter surface. 6. From below the counter surface insert an 8" to 10" (20 cm to 25 cm) flat tip screwdriver into the locking ring tab slots and twist in a clockwise motion to lock well in place. 7. Trim excess putty and sealant from around well rim. 8. Mount control to front panel using hardware. Maintain 4" clearance between well and front panel. Connect power. Check power. Check nameplate for proper voltage. NOTE: Electrically connectunit in compliance with local and NEC codes. 4 FOR 72" THERMOSTAT ADD SUFFIX -72 TO MODEL & P/N FOR UL KIT ADD SUFFIX -36UL OR -72UL TO MODEL & P/N MODEL P/N VOLTS WATTS HFW-1D 55440 208/240V 1200/1600W HFW-1 55444 208/240V 1200/1600W HFW-1D 55445 120V 1500W HFW-1 56449 120V 1500W Parts Not Shown Item P/N Description Item P/N Description 123456 789 10 11 12 13 14 15 16 17 18 19 20 56542 56655 55872 56416 88961 89061 89068 89071 89059 89073 89120 56436 55304 56443 56442 56506 56322 55441 56370 56529 56530 56527 56528 56581 55341 55340 55343 55339 56586 56386 56387 56388 21 22 23 24 Pan & Wrapper W/Drain Pan & Wrapper No Drain Side Insulation End Insulation Reflector Plate Element 120V-1500W Element 208/240V-1200/1600W Control Housing Increase Decrease Plate Indicator Light Thermostat Knob Conduit Box Flex Conduit Anti Short Bushing Conduit Connector 90° Conduit Connector Conduit Box Cover Bottom Panel Bottom Insulation Hole Cover Dial Setting Plate Drain Strainer Permagum Package Wire Set 10-24 Green Hex Nut 10-24 Hex Nut Flat Washer 5/16" X 3/4" X 1/16" #10 Flat Washer #10 External Lockwasher #8 X 1/2" Sheet Metal Screw Jiffy Clip HFW-1, 1D PARTS LIST & EXPLODED VIEW UL KIT 5 6 4 22 2 1 19 3 10 9 11 20 18 8 21 23 24 17 7 13 15 16 12 14 5 HFW-12, 12D PARTS LIST & EXPLODED VIEW Item P/N Description Item P/N Description 1 2 3 4 5 6 7 8 9 56409 56459 56411 56412 55990 55695 55696 55960 56370 Pan & Wrapper (W/Drain) Pan & Wrapper (No Drain) Side Insulation End Insulation Element Cover Element ClampAnti-rotation Clamp Heating Element 120V-800W Control Housing 22 23 24 2...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: