Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The bin must be leveled before proceeding to step 2. 2. INSTALLATION OF ICE MACHINES: A. See service manual for uncrating and inspection of both ice machines. B. Remove top cover from lower ice machine. C. Set ice machine carefully and squarely on bin. D. Position shim angles provided in kit on right and left-hand sides, as shown in Illustration 2. E. Set top ice machine carefully and squarely on bottom ice machine. F. Remove front and side panels from both ice machines. G. Bolt two ice machines together with 1/4-20 x 1” long bolt, lock washer, and nut provided in kit, one each side. 3. INSTALLATION OF WATER SHIELD: A. Remove Angle “A” (Illustration 2) and set aside. Remove existing sheet metal screw in lower right corner of bulkhead (Illustration 1). B. Locate the water shield above the electrical box of the lower ice machine, as shown in Illustration 1. Secure with screw removed in step 3A. C. Seal the joints between the water shield and bulkhead, as shown in Illustration 1 with RTV sealant. 4. INSTALLATION OF ICE CHUTE: A. Remove ice chute from kit and set bottom mounting brackets over Angle “B” (Illustration 2). B. Put Angle “A” in slots of top mounting brackets and secure in place. C. Check for free movement of both water curtains. D. Proceed to ice machine service manual for electrical and water hook-up and start-up procedure. E. Reattach front and side panels. F. Add four sheet metal screws to side panels, two on each side of lower ice machine where the lower and upper ice machines butt. Manitowoc Ice, Inc. 2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8002453 Web Site - Rev. 05/31/01...
Эта инструкция также подходит к моделям:Прочая кухонная техника - K00056 (10.2 kb)