Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
Secure the brackets using the #10 sheet metal screws provided. 7. Follow the ice maker manufacturer’s instructions to complete the installation of the ice maker including the bin thermostat if so equipped or required. IMPORTANT: For Scotsman CM series ice makers with sonic ice level control, Bin Thermostat Kit KSB1 must be ordered with the ice maker ! CAUTION: The bin thermostat location must not interfere with agitator rotation. 8. Locate the cleaning caution label (item 5) on the manual ice fill cover (item 4) as shown in Figure 1. Place the manual fill cover in position over the flange on the lid assembly and the front access hopper opening. Figure 1. Dispenser 30 7 3 SEE DETAIL A 7 ICEMAKER SEAL TO ITEM 1 WITH ITEM 3 REFER TO STEP 5 DETAIL A DRILL o .147 HOLES USING BOTTOM OF SLOTTED HOLES IN LID AS A TEMPLATE 5 4 2 1 POSITION ICEMAKER FLUSH WITH REAR OF LID AND CENTERED ON DISPENSER 7. Publication Number: 92254 - 2 -© 1998-2010, IMI Cornelius Inc. ED300 Dispenser Kit Installation Instructions © 1998-2010, IMI Cornelius Inc. - 3 - Publication Number: 92254 Figure 2. ED300 Baffle Kit Figure 3. Mounting Template 4 PLC. ICEMAKER SHOWN FOR REFERENCE ONLY 4 PLC. BAFFLE (ITEM 6) SHOWN IN PLACE 4 PLC. 1 9 8 6 10 o 7/16 (6) PLCS OPENING 18 5/8 8 5/8 22 3/8 3 3/16 44 3/8 29 3/4 31 1/2 15 3 1/2 20 3/8 1 13/16 40 3/4 1 5/16 6 11/16 21 1/4 15 12 4 1/2 REMOVABLE SINK RECOMMENDED COUNTER OPENING SIZE 12" X 15" FOR UTILITIES AND BEVERAGE TUBING. OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA. 2 9/16 16 1/8 8 1/2 TO FRONT OF DRIP TRAY ON COUNTER TOP TO FRONT TOP OF DRIP TRAY ...
Эта инструкция также подходит к моделям:Прочая кухонная техника - 29505 (145.08 kb)
Прочая кухонная техника - 08030 (145.08 kb)