Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Non-observance could cause a fatal electric shock! • Never attempt to open the housing yourself. • Do not place any kind of object into the inside of the housing. • Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet. • Do not touch the plug with wet or damp hands. • Check the cord and the plug regularly for any possible damage. If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard. • Do not use the appliance if it is dropped or otherwise damaged or if the cord or plug are damaged. In the case of damage, take the appliance to an electrical repair shop for examination and repair if necessary. • Never attempt to repair the appliance yourself. This could cause an electric shock. • Do not allow the cord to hang over sharp edges and keep it well away from hot objects and naked flames. Remove the plug from the socket only by holding the plug. • For extra protection it is possible to fit the electric household installation with a fault current breaker with a rated breaking current of not more than 30mA. Ask your electrician for advice. • Make sure that there is no danger that the cord or extension cord may inadvertently be pulled or cause anyone to trip when in use. • If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur. • This appliance is not suitable for commercial use nor for use in the open air. • Never leave the appliance unattended while it is in use. • Children cannot recognise the dangers involved in the incorrect use of electrical appliances. Therefore never allow children to use household appliances without supervision. GB GBGB • Always remove is cleaned. • Danger! Nominal voltage the mains socket. • Switch the appliance off before disconnecting • Never use the cord to carry SPECIAL SAFETY INSTRUCTIONS • The unit heats up very quickly Watch out therefore constantly for hot water and steam it only on the handles. • Do not use any accessories not supplied • Do not place this unit next to hot devices • Caution: The power cord must not touch • This unit is suitable only for boiling eggs. Please with this unit. • Do not operate this unit without the cover (6) and BEFORE STARTING FOR THE FIRST TIME • Remove all packing material. • Clean the unit before using it for the first time (see CLEANING AND CARE). • There can be some smoke and smell when using it for the first time. manufacturing process are being burned on the surface of the unit. OPERATION • You can boil up to 7 hen’s eggs per cooking session. Please always use only fresh eggs. • Place the egg tray (2) on the motor unit (1). • Please use the egg-pick (3) to pierce a hole in the egg's blunt end. Please do not use force, otherwise the egg might break. Caution, Danger of injury: The needle of the egg pecker (3) is very sharp! You can place only one egg in each of the seven egg inserts (4). Please put in the bigger end of the egg into the egg insert (4) (see the figure). • Now fill in the required quantity of cold, clear water into the measuring beaker (13). The quantity of water depends upon the number of eggs to be boiled and the hardness desired (soft, medium or hard boiled). There are three scales (12) on the measuring beaker (13) showing how much water to use (indications are in English, German and French). Scale 1 – soft, weich, mollet Cooking time approx. 12 min. Scale 2 – medium, mittel, medium Cooking time approx. 15 min. Scale 3 – hard, hart, dur Cooking time approx. 17 min. • Example: If you want to make four soft-boiled eggs, fill water up to the marking 4 on scale 1 (12). • If the water is very hard, you can add half a teaspoon of vinegar. Please do not otherwise use any fluids other than water. Also, do not add any additives (such as salt) into the water. • Now pour the water from the measuring beaker (13) into the water tray (11). Take care not to spill any water on the housing of the motor unit (1)! • Cover the egg insert (4) with the cover (5). Please ensure that egg insert (4) and cover (5) fit properly on the motor unit (1). • Put the switch I O (10) in position O (= Unit off). • Connect the mains plug (7) through a suitable plug socket and put the switch O/I (10) in position I. The indicator lamp in the switch O/I (10) lights up. • The hot plate on the motor unit (1) begins to heat up the water in the water tray (11). • Caution: Parts of the unit become very hot during and after use! While the unit is in use, touch it only at the handles (8, 9). Please watch out particularly for hot water and emitted steam! • Burning hazard: Do not shift the unit while it is in use. 5 6 GB GBGB • The water • The cover (5) must while eggs are immediately. • When the water in the An audible signal is emitted. The indicator lamp in the O/I (10) goes off. The hot plate on the motor starts cooling off. • Put the switch O/I (10) in position O. The au...