Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
(387 Kgs.)* of ICE per day Constructed from sturdy, corrosion-resistant 300 series stainless steel Only 16 inches wide Available with an air-or water-cooled condenser EMF 800 on a B55 Bin ICE-O-Matic ® is the Best ICE Making Solution for: Hard Water, Food Safety and Tight Spaces Problem Solution Tight-Fitting Spaces Kitchen space utilization Maximum ICE Maximum ICE production in a minimum amount of space • Maximum ICE production in a 16 inch wide cabinet • Maximum ICE production in a 115 volt ICE Maker • Works on all industry dispensers and bins Poor Ice Quality Ice is too wet and soft Dependable ICE ICE-O-Matic Flake ICE Makers remove excess water by pushing the flaked ICE through an extrusion process. The result is high quality flaked ICE which is ideal for medical, supermaket or restaurant applications. Operating Environments Built to last? ICE-O-Matic® Tough Constructed with a brass evaporator and rugged stainless steel transport system enclosed in polyurethane insulation Dirty Air Filter Forget to change the air filter? Filter-Free Air No air filter to change *Rated at 70 ° (21°) Air / 50° (10°) Water EMF 800 Series Flake ICE Maker - Modular Dimensions and Air Flow 23.5" 16" (597 mm) (406 mm) Air in -Front of of ICE Maker Air Out -Both Sides of ICE Maker 4.50" (114mm) i TOP VIEW 82" (2083 mm) 31"1 (787 mm) 30" (762 mm) ICE Dispense Area "To Bin" in Bottom of Machine-5.50" (140mm) DIA 7/8" (22mm) DIA Hoi for Electrical Connection to Control Box ICE Maker Water Out 1/2" (13mm) ID. Plastic Tubing Condenser Water Out 3/8" (10mm) Copper Tubing Water Cooled Only Condenser Water In 3/8" (10mm) Copper Tubing Water Cooled Only REAR VIEW ICE PRODUCTION CHART POUNDS (KILOGRAMS) PER 24 HOURS EMF 800 Conds. Air Temp. Water Temp. ° F (°C) Air Temp. Water Temp. °F (°C) Unit °F (°C) 80°(27°) 70°(21°) 50°(10°) °F (°C) 80°(27°) 70°(21°) 50°(10°) 90° (32°) 588 (267) 632 (287) 691 (314) 90° (32°) 568 (258) 641 (291) 625 (284) Air Cooled 80° (27°) 622 (283) 669 (304) 736 (334) 80° (27°) 613 (278) 692 (314) 723 (328) 70° (21°) 659 (300) 709 (322) 780 (355) 70° (21°) 662 (301) 748 (339) 821 (373) 90° (32°) 703 (320) 756 (344) 794 (361) Water Cooled 80° (27°) 696 (316) 748 (340) 823 (374) 70° (21°) 720 (327) 774 (352) 852 (387) EMF 705 All specifications and performance data are subject to normal manufacturing variances. OPERATING LIMITS Ambient Temp. Range Air & Water Water Temp. Range Water Pressure Ice Maker Water in 50° 50° 104°F (10° - 40°C) 60Hz 110°F (10° - 43°C) 50Hz 40° - 80°F (4.5° - 27°C) Min. 20 psi (1.4 bar) Max. 60 psi (6.9 bar) Condenser Inlet Water (Water cooled only) Min. 20 psi (1.4 bar) Max. 60 psi (6.9 bar) ORDERING AND SPECIFICATION INFORMATION Model No. Cond. Unit ICE Production per 24 hrs. at 70° Air/50° Water lbs. (Kgs.) ICE Production per 24 hrs. at 90° Air/70° Water lbs. (Kgs.) Water Used-per 100 lb 90° Air/70 ICE Prod. Use Gals. (Lits.) s. of ICE ° Water Cond. Use Kilowatts Used per 100 lbs. of ICE 90° Air 70° Water Btuh Voltage Characteristics No. of Wires Min. Circuit Amp. Max. Fuse Size Shipping Weight lbs. (Kgs.) EMF800AS Air 780 (355) 632 (287) 12.0 (45) n/a 4.3 7693 115/60/1 3 19.8 20 205 (93) EMF800WS Water 852 (387) 756 (344) 12.0 (45) 146.6 (555) 3.2 8261 115/60/1 3 16.5 20 205 (93) EMF705AS Air 821 (373) 641 (291) 12.0 (45) n/a 4.1 5170 220-240/50/1 3 8.6 15 205 (93) See Bin specification sheet for information on ICE storage bins Please note: air-cooled units require 6" (152 mm) clearance for air intake and exhaust. NSF) c®us © A We reserve the right to make changes in design and construction at any time without obligation. 2003© ICE-O-Matic Rev Code: 2005A-07/03-SS O-Matic ® ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239 Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com...