Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Each collated set of copies or group of copies can be stacked offset from the previous set. PART NAMES Top cover l The top tray and second tray are each furnished with an extendable component, which is to be used when copying onto size 11" x 17" paper. Specifications Finisher release lever Top tray Second tray (not used in the copy mode) Stapler unit Paper transport area cover Paper feed area cover Offset tray When copying onto size 11” x 17” paper, lower the metal support located at the tip of the offset tray. Tray capacity Top tray: 500 sheets Second tray: 500 sheets Offset tray: 1,500 sheets (8-1/2" x 11") 750 sheets (larger than 8-1/2" x 11") Paper size Top tray: 5-1/2" x 8-1/2" to 11" x 17" Second tray: 5-1/2" x 8-1/2" to 11" x 17" Offset tray: 8-1/2" x 11" to 11" x 17" Paper weight Top tray: 14 lbs. to 34 lbs. (when face up) 17 lbs. to 28 lbs. (when face down) Second tray: 17 lbs. to 28 lbs. Offset tray: 17 lbs. to 34 lbs. (when face up) 17 lbs. to 28 lbs. (when face down) For paper weighing more than 28 lbs., 8-1/2" x 11" is the maximum size. Offset 1.2 inch (30 mm) Paper size for stapling 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17" Stapling capacity 50 sheets (20 lbs.) (25 sheets for 8-1/2" x 14" and 11" x 17" paper) Power supply Drawn from the copier Weight Approx. 111 lbs. (50 kg) Dimensions 23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H) (590 mm (W) x 560 mm (D) x 998 mm (H)) OPTIONAL EQUIPMENTFinisher (AR-CHAPTER7 Specifications are subject to change for improvement without notice. 7-3 FINISHER (AR-FN1N) Offset stack OUTPUT TOP TRAY OFFSET SOOFFSET TRAY AUTO AUTO 8 In the initial setting, the offset tray will move from side to side so that each copy set is offset by approximately 1.2 inch (30 mm). When the offset stack function is disabled, the offset tray will not move from side to side. The offset stack function can be enabled or disabled by pressing the OUTPUT key and then the “OFFSET” check mark box on the touch panel. When the STAPLE SORT mode is selected, the offset stack function will be disabled. The top tray cannot be used to offset copies. To select the top tray, press the “TOP TRAY” key on the touch panel. CHAPTER7 OFFSET mode When copying in the SORT mode, each collated set of copies will be stacked offset approximately 1.2 inch (30 mm) from the previous set. When copying in the GROUP mode, copies will be offset stacked in groups of multiple copies from the same original. NON-OFFSET mode All copies will be aligned in one stack in the offset tray or the top tray with no offset. 1 2 3 11 21 1 1 2 3 1OPTIONAL EQUIPMENTFinisher (AR-FN1N) 7-4 FINISHER (AR-FN1N) Sort and group When SORT is selected, the SORT ( ) icon will be indicated and copies will be collated by sets. When STAPLE SORT is selected, the STAPLE SORT ( ) icon will be indicated and collated copies will be stapled automatically. When the SORT or STAPLE SORT icon is not indicated on the touch panel, copies will be grouped by originals. To change the finisher mode, press the OUTPUT key and then select the desired mode on the touch panel. . When the RADF is used for copying, copies will be collated in the OFFSET mode as the default setting. When the document glass is used for copying, copies will be grouped in the OFFSET mode as the default setting. 1 2 3 3213213211 2 3 332 3 2 1112 1 2 3 2323231 1 1 SORT mode Each set of copies will be sequentially delivered to the offset tray or the top tray as selected. GROUP mode All copies of the same original will be grouped in the offset tray or the top tray. STAPLE SORT mode Collated sets of copies will be stapled and delivered to the offset tray. . See next page for details. NOTE: Rotation copy (image of original will be rotated when the orientation of the original does not match that of the copy paper) will not function when the STAPLE SORT mode is set. OPTIONAL EQUIPMENTFinisher (AR-CHAPTER7 7-5 FINISHER (AR-FN1N) Staple sort The STAPLE SORT mode staples 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17" size copies. Stapled sets cannot be delivered to the top tray. NOTE: Different size originals cannot be copied onto copy paper of their respective sizes in the STAPLE SORT mode. The paper size selected for the first scanned original will be used for all originals. To copy different size originals in the STAPLE SORT mode, select the paper size for the largest original. Using the RADF CHAPTER7 OPTIONAL EQUIPMENTFinisher (AR-FN1N) AUTO EXPOSURE Stapling position READY TO COPY.(DOCUMENT FEEDER MODE) OUTPUT TOP TRAY OFFSET SORTOFFSET TRAY STAPLE SORT GROUP OK AUTO EXPOSURE PAPER SELECT 100% COPY RATIO AUTO 8/ 111 2 1 1 Set the originals in the document feeder tray. . If the number of copies in one set is more than 50 for 8-1/2" x 11" or 8-1/2" x 11"R paper or 25 for 8-1/2" x 14" or 11" x 17" paper, the copies will not be stapled. . The stapling position shown in the left figure is the factory default position. 2 2 Press the OUTPUT key. 3 3 Press the “STAPLE SORT” key on the touch ...
Эта инструкция также подходит к моделям:Принтеры - AR-407 (3.2 mb)