Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
No. 1692029 TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE TOLERANCE ±10% SIZE SAE GRADE #2 o SAE GRADE #5 © SAE GRADE #8 © 8-32- 19 In. Lbs. 30 In. Lbs. 41 In. Lbs. 8-36 20 99 31 43 10-24 27 99 43 60 10-32 31 99 49 68 1/4-20 66 99 8 Ft. Lbs 12 Ft. Lbs. 1/4-28 76 99 10 14 5/16-18 11 Ft. Lbs 17 25 5/16-24 12 n 19 25 3/8-16 20 tt 30 45 3/8-24 23 n 35 50 7/16-14 30 n 50 70 7/16-20 35 ii 55 80 1/2-13 50 it 75 110 1/2-20 55 ii 90 120 9/16-20 65 it 110 150 9/16-18 75 it 120 170 5/8-11 90 it 150 220 5/8-18 100 ii 180 240 3/4-10 160 it 260 386 3/4-16 180 it 300 420 7/8-9 140 ii 400 600 7/8-14 155 ii 440 660 1-8 220 ii 580 900 1-12 240 ii 640 1,000 NOTES: 1. These torque values are to be used for all Simplicity hardware excluding: locknuts, self-tapping screws, thread forming screws, and sheet metal screws. 2. Unless otherwise noted on assembly drawings all torque values must meet this specification. BOLT HEAD MARKING S.A.E. GRADE: 2 o 5 » & Table of Contents STANDARD FASTENERS ............................................... Inside Front Cover RECOMMENDED ACCESSORIES .......................... ............................ 1 SAFETY DECALS ....................................................................... 1 SAFETY RULES ........................................................................ 2 INSTALLATION & REMOVAL ........................................................... 3 OPERATION AND STORAGE ........................................................... 5 TROUBLESHOOTING .................................................................. 6 ASSEMBLY ............................................................................ 7 TORQUE SPECIFICATIONS ............................................ Inside Back Cover Recommended Accessories Front counterweight is recommended when using rear-mounted grass catcher. On slopes over 15% (8.5°), use two rear wheel weights in addition to front counterweight. Always mow up and down the face of slopes, never across the face. Never mow on slopes greater than 30% (16.7°). Safety Decals 'O A WARNING ° & DO NOT OPEN COVER WITH ENGINE RUNNING ^ *>• DO NOT OPERATE ENGINE WITHOUT COMPLETE CATCHER IN PLACE L WHEN OPERATING ON SLOPES REFER TO OPERATOR'S MANUAL FOR COUNTERWEIGHTS 1 J / A DANGER ROTATING CUTTING BLADE DO NOT OPERATE MOWER WITHOUT DEFLECTOR OR ENTIRE GRASS CATCHER IN PUCE. 1 Safety Rules A Read these safety rules and the safety rules in your tractor Operator’s Manual and follow them closely. Failure to obey these rules could result in loss of control of vehicle, severe personal injury to yourself, or damage to property or equipment. The triangle in the text signifies important cautions or warnings which must be followed. 1. Know the controls and how to stop the tractor quickly. READ THE TRACTOR’S OPERATOR’S MANUAL. 2. Shut the engine (motor) off before attaching, adjusting or d isconnecti ng the col lection system. 3. Check the grass catcher frame to make sure it is attached securely to tractor. 4. Look behind to make sure the area is clear before backing up. 5. CAUTION: For added tractor stability and to prevent tipping or loss of control; a. DO drive in reduced speed on uneven ground and when turning corners. b. Reduce loads on hillsides. It is recommended that the Collection System be kept only half full when negotiating any slopes. Start mowing on slopes when the Collection System is empty. c. Mow up and down the face of slopes: never across the face of any slope. 6. CAUTION: Objects may be thrown from mower. For your safety. a. DO NOT open the cover while the mower blades are turning. Shut off the engine before removing the grass chute. b. Be sure the complete Collection System is in place (cover secure and grass chute connected) before operating the mower. c. DO check the cover and bags frequently for wear and tear. Replace with the new cover for safety protection. 7. For best results when mowing grass: Set the mower to cut off from 1 to 2 inches of grass (leave 1-1/2" of grass). If grass is exceptionally tall, set your mower as high as possible for first cutting. Lower cutting height at succeeding cuttings until proper height is reached. It may be necessary to mow tall grass at a slower tractor ground speed (keep engine at full throttle). A WARNING Do not operate the tractor unless the entire grass catcher system or mower discharge deflector is properly installed. ^WARNING Before raising cover, disengage mower, turn off engine and remove the key. Do not remove catcher tube from blower housing or cover while mower is running. 2 Installation & Removal NOTE For first-time installation, follow Assembly Instructions provided at the back of this manual. 1. Install grass bag and bracket assembly (A, figure 1) onto frame spacers (B) as shown in figure 1. Guide front of bracket assembly under front spacers and push forward so assembly will r...