Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Close Bin1 Door
The rear door of output expander is not
Close the door until it locks into place.
securely latched.
Close Fuser Door
The fuser door is not securely latched.
Open the rear door and close the fuser
door until it locks into place.
Tray [x] Open
The displayed tray is open.
Close the tray until it locks into place.
Tray [x] Open
Close Tray [x]
HCF Open
HCF(High Capcity Feeder) is open.
Close the HCF until it locks into place.
HCF Open
Close Door
Tray [x] Empty
There is no paper in the tray.
Load paper in the tray. See "Loading
Load [Size][Type]
Print Media in the Paper Tray".
HCF Empty
There is no paper in the HCF.
Load paper in the HCF. See "Using the
Load [Size][Type]
High Capacity Feeder".
MPF Empty
There is no paper in the multi-purpose
Load paper in the multi-purpose feeder.
Load [Size][Type]
feeder.
See "Using the Multi-purpose Feeder".
Press
Select
Paper Mismatch/
The paper size specified in the printer
Load the correct paper in the tray.
Tray [x]/MPF
properties does not match the paper
Load [Size][Type]
being loading.
Continue
,
Cancel
Paper Jam 0
Paper has jammed around the toner
Clear the jam. See "Around the toner
Check Toner Cover
cartridge area.
cartridge".
MP Tray
Paper has jammed in the feeding area of
Clear the jam. See "Multi-purpose feeder
Check MPF Door
the multi-purpose feeder.
Jam".
Paper Jam 0
Paper has jammed in the feeding area of
Clear the jam. See "Paper Feed Jam (tray
Check Tray[x]
the paper tray.
1)" or "Paper Feed Jam (optional trays)".
Paper Jam 1
Paper has jammed in the paper exit area Clear the jam. See "In the paper exit
Open/Close Door
or around the toner cartridge area.
area" or "Around the toner cartridge".
Paper Jam 2...
Paper has jammed in the paper exit area. Clear the jam. See "In the paper exit
area" or "Around the toner cartridge".
Duplex jam 0...
Paper has jammed during duplex
Clear the jam. See "Duplex jam 0".
printing.
Duplex jam 1...
Paper has jammed during duplex
Clear the jam. See "Duplex jam 1".
printing.
Standard Bin Full/
The output tray is full.
The output tray can hold up to 250
Standard Bin is 90%
sheets of plain paper. Once the paper is
Full
removed from the output tray, the printer
resumes printing.
Optional Bin1 Full
The output tray of output expander is
The output expander can hold up to 600
full.
sheets of plain paper. Once the paper is
removed from the output expander, the
printer resumes printing.
Open Heat
There is a problem in the fuser unit.
Unplug the power cord and plug it back
Open Heat Error
in. If the problem persists, please call for
Power Cycle
service.
Low Heat/
There is a problem in the fuser unit.
Unplug the power cord and plug it back
Low heat Error
in. If the problem persists, please call for
Power Cycle
service.
Over Heat
There is a problem in the fuser unit.
Unplug the power cord and plug it back
Overheat Error
in. If the problem persists, please call for
Power Cycle
service.
LSU Motor Error/
A problem has occurred in the LSU(Laser
Unplug the power cord and plug it back
LSU Motor Error/
Scanning Unit).
in. If the problem persists, please call for
Power Cycle
service.
Hsync Error/
A problem has occurred in the LSU(Laser
Unplug the power cord and plug it back
LSU Hsync Error
Scanning Unit).
in. If the problem persists, please call for
Power Cycle
service.
Fuser Error
There is a problem in the cooling fan of
Open and then close the rear door.
Fuser Fan Locked
the printer.
Power Cycle
SMPS Error
There is a problem in the SMPS fan of the Unplug the power cord and plug it back
SMPS Fan Locked
printer.
in. If the problem persists, please call for
Power Cycle
service.
Fuser Error/
The fuser unit is not installed or not
Install the fuser unit or open and then
Fuser Not Installed
detected.
close the rear door.
Check Rear Door
Inner Temp. Error/
There is a problem in your printer system. Unplug the power cord and plug it back
Inner Temp. Error
in. If the problem persists, please call for
Power Cycle
service.
Deve Motor Error/
There is a problem in the development
Unplug the power cord and plug it back
Deve Motor Locked
motor of the printer.
in. If the problem persists, please call for
Power Cycle
service.
Power Saver
The printer is in power save mode.
When data is received, it switches to on-
line automatically.
Warming Up
Your printer is warming up now.
Please wait a few minutes.
...