Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Dell 5230/5350
3 Unlock the length guide, squeeze the length guide tab inward as
Note: Notice the maximum fill line on the side of the tray which
shown, and slide the guide to the correct position for the paper
indicates the maximum height for loading paper. Do not
size being loaded.
overload the tray.
Quick Reference
1
2
Loading paper and
specialty media
Loading the 250-sheet or 550-sheet
3
6 If necessary, adjust the paper guides to lightly touch the sides of
the stack, and lock the length guide for the paper sizes indicated
tray
on the tray.
1 Pull the tray out.
7 Insert the tray.
Note:
8 If a different type of paper was loaded than the type previously
Do not remove trays while a job prints or while Busy
loaded in the tray, then change the Paper Type setting for the tray
appears on the display. Doing so may cause a jam.
from the printer control panel.
2
Notes:
Squeeze the width guide tab inward as shown, and move the
width guide to the correct position for the paper size being
• Use the size indicators on the bottom of the tray to help
loaded.
position the guides.
Clearing jams
• For standard paper sizes, lock the length guide.
1
4 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
200 and 201 paper jams
surface.
1 Push the release latch, and then lower the multipurpose feeder
door.
2
5
2
Load the paper:
1
• For single-sided printing, load the paper print side facedown
with the leading edge of the paper toward the front of the tray.
Note: For print jobs using an optional Staple Finisher, place
the leading edge of the paper toward the back of the tray.
• For two-sided or duplex printing, load the paper faceup with
the leading edge of the paper toward the back of the tray.
Note: For print jobs using an optional Staple Finisher, place
the leading edge of the paper toward the front of the tray.
1
...