Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
52 KirC2_ENcopyF_FM.book Page 53 Monday, September 22, 2003 11:36 AM Settings You Can Change with User Tools Settings You Can Change with User Tools APS/ Auto R/E Priority You can select [Auto Paper Select Priority] (APS Priority) or [Auto R/E Priority] (Auto Reduce/Enlarge Priority). When you cancel this setting, select [Off]. Note . Default: Auto Paper Select Priority Auto Tray Switching If you load same size paper in two or more trays, the machine automatically shifts to the other tray using image rotation when the first tray runs out of paper (if [On] is selected.) This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not. Note . Default: On . Off: When a paper tray runs out of paper, copying is interrupted and the “Load paper” message appears. Original Type Setting You can adjust copy finish quality level according to original type. You can choose these functions after selecting [Original Type 1 (Text)]or [Original Type 2 (Photo)]. • Text Mode 1 normal text originals • Text Mode 2 newspapers, semi-transparent originals (reverse side print faintly visible) • Photo Mode 1 text/photo images containing mostly photo areas • Photo Mode 2 text/photo images containing mostly text areas • Photo Mode 3 actual photographic paper • Special Mode 1 Highly transparent originals (reverse side clearly visible), or light text on a colored background. Also for originals with very grainy backgrounds (some newspapers) and light text. • Special Mode 2 originals with colored text and lines • Special Mode 3 photo images created by dithering (visible dots), such as newspaper photos -normal resolution • Special Mode 4 photo images created by dithering (visible dots), such as newspaper photos -coarse resolution • Special Mode 5 normal text originals (reproducing the background) Note . Default: • Original Type 1 (Text): Text Mode 1 • Original Type 2 (Photo): Photo Mode 1 4 53 KirC2_ENcopyF_FM.book Page 54 Monday, September 22, 2003 11:36 AM User Tools (Copier Features) Duplex Mode Priority You can select the type of Duplex function effective when the machine is turned on, reset, or modes are cleared. Limitation . Available only for Type 3. Note . Default: 1 Sided > 1 Sided Orientation • Type 1, Type 2 You can select the original orientation when making Combine/Series copies. • Type 3 You can select the original orientation when using the Combine/Series, or two-sided originals to one- sided Duplex function. Note . Default: Do not Specify . When you select [Always Specify], you must select the orientation of originals. Max. Number of Sets The maximum copy quantity can be set between 1 and 99 using number keys. Note . Default: 99 sheets Original Count Display You can set to display the count of originals and copying pages on the display when [On] is selected. Note . Default: Off Reproduction Ratio You can select which reduce, enlarge, or input ratio is shown on the display with priority when [Reduce] or [Enlarge] is selected. Note . Default: • Metric version: • Ratio 1: 50% • Ratio 2: 71% • Ratio 3: 82% • Ratio 4: 93% • Ratio 5: 122% • Ratio 6: 141% • Ratio 7: 200% • Inch version: • Ratio 1: 50% • Ratio 2: 65% • Ratio 3: 78% • Ratio 4: 93% • Ratio 5: 121% • Ratio 6: 129% • Ratio 7: 155% 4 54 KirC2_ENcopyF_FM.book Page 55 Monday, September 22, 2003 11:36 AM Settings You Can Change with User Tools Preset R/E Priority You can set the ratio with priority when [R/E] is selected. Note . Default: • Metric version: 71% • Inch version: 65% Duplex Margin You can specify left margin on the back side of copies, and top margin on the front side. Select [Top Margin] or [Left Margin], and then set the required value. • Top Margin: 0 -50 mm, 0” – 2” • Left Margin: 0 -50 mm, 0” – 2” Limitation . Available only for Type 3 Note . Default: • Metric version: 5 mm • Inch version: 0.2 inch Rotate Sort You can select a Sort function: [On] or [Off]. When you select [On], you can select [Rotate Sort]. See p.30 “Sort”. When you select [Off], you cannot select [Rotate Sort]. If you press the { {{{{Sort} }}}} key, only Sort is enabled. Note . Default: Off . When using Type 1 without the optional tray, you cannot use this setting. Rotate Sort:Auto Continue If you select [Off] when the paper tray in use runs out of paper, the machine stops, allowing you to add paper so all copies can be rotate-sorted. Note . Default:Off . When using Type 1 without the optional tray, you cannot use this setting. Letterhead Setting If you select [On] for this function, the machine rotates the image correctly. Note . Default: Off . Orientation-fixed (top to bottom) or two-sided paper (Type 3 only) might not print correctly, depending on how the originals and paper are placed. Reference When using letterhead paper, check its orientation is correct. See p.44 “Orientation-Fixed Paper or Two-Sided Paper”. 4 55 KirC2_ENcopyF_FM.book Page 56 Monday, September 22, 2003 11:36 AM User Tools (Copier Features) 4 56 575. Remarks Do's and Don...