Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Принтеры - WorkCentre 7232/7242 (1.53 mb)
Принтеры - WorkCentre 7232/7242 (67.16 mb)
Фрагмент инструкции
Top Cover Open this cover when clearing paper jams. Finisher Tray Delivers outputs processed by the Office Finisher LX. Creasing Unit Makes a crease in each sheet of copies or prints for easy manual folding. Staple Cartridge Contains Staples used in the Automatic Stapler. Front Cover Open this cover when clearing paper jams or loading staples. Interface Cover Open this cover when emptying the Hole Punch Waste Container. Hole Punch Waste Container Collects punched waste. Office Finisher LX - User Guide The Copy Output Screen The Copy Output Screen Copy Output Cancel Save Paper Supply Staple Hole punch Collation Co llated Auto Paper Select No Staple No Hole punch Unco llated 1 Staple 2 Hole punch With Separators 2 Staples 3 Hole punch Output Destination 2 Staples Center Tray Top The Copy Output screen allows you to sort copy outputs. If the optional Office Finisher LX has been installed, the stapling, hole-punching, and/or creasing feature will also be available. NOTE: The features displayed on the Copy Output screen vary depending on whether a finisher is installed on your machine, whether the installed finisher is an Office Finisher LX, an Office Finisher, or an Integrated Office Finisher, and what options are installed on the finisher. Office Finisher LX - User Guide Installing the Tray Attachment Installing the Tray Attachment When unstapled A4 LEF, 8.5 x 11” LEF, or B5 LEF paper is output to the Finisher tray, it is recommended to use the Tray Attachment. Remove the Tray Attachment from under the Office Finisher LX Tray. Attach the Tray Attachment to the tray, as shown. Office Finisher LX - User Guide Loading Staples in the Automatic Stapler Loading Staples in the Automatic Stapler The optional Office Finisher LX contains an automatic stapler. When the finisher runs out of staples, a message appears on the touch screen. When this message is displayed, load a new staple case into the staple cartridge. Make sure that the machine is not operating, and open the front cover of the finisher. Hold the staple cartridge by the lever R1 and pull it to the right. Hold the staple cartridge by the orange lever and remove it from the finisher. NOTE: The staple cartridge is firmly inserted. A slight force is required to pull the cartridge out of the finisher. CAUTION: Do not discard the Staple Cartridge. Only the used Staple Case should be discarded. The Staple Cartridge can be refilled with a new Staple Case. Office Finisher LX - User Guide Loading Staples in the Automatic Stapler Pinch both sides of the empty staple case with your fingers, and remove the staple case from the cartridge. Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. Hold the staple cartridge by the orange lever, and insert it into the finisher until it clicks. Close the front cover of the finisher. NOTE: If the front cover is not completely closed, a message will appear and th...