Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If Data remains in the printer memory, pressing Go will print that remaining data. You can clear some error indications by pressing Go. Follow the control panel instructions or see Troubleshooting on page 141 to clear all other errors. You can switch to Reprint mode by pressing Go and holding it down for about 4 seconds. (For details, see Reprinting documents on page 78. Note • The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk shows what you have chosen, you can easily see the current settings as you look through the LCD. • If the printer is in Pause mode and you do not want to print the data left, press Cancel. Once the job has been canceled, the printer will return to the Ready state. 3 Cancel You can cancel the processing or printing of data by pressing Cancel. The LCD shows Cancel Printing. until the job is canceled. To delete all jobs, press Cancel for about 4 seconds until the LCD shows Cancel All Jobs and then release it. After canceling the job, the printer returns to the Ready state. Pressing Cancel will exit the control panel menu and return the printer to the Ready state. Secure Print If you want to print a secure data protected by a password, press Secure Print. For details, see Printing Secure data on page 79 + or - button Moving through menus on the LCD Pressing + or -when the printer is in the Ready state, takes it offline and the LCD will show the control panel menu. Press to scroll through the menus and options. Press the button until you see the setting you want. Entering numbers You can enter numbers in two ways. You can press + or -to move up or down one number at a time, or you can hold down + or -to move faster. When you see the number you want, press OK. 75 Control Panel Back Pressing Back when the printer is in the Ready state takes it offline, and the LCD will show the control panel menu. Pressing Back allows you to return to the previous level from the current menu level. Back also allows you to choose the previous digit while setting numbers. When you choose a setting and it does not have an asterisk (OK was not pressed), Back allows you to return to the previous menu level with the original setting unchanged. OK 3 Pressing OK when the printer is in the Ready state takes it offline, and the LCD will show the control panel menu. Pressing OK allows you to choose the displayed menu or option. After changing a setting, the LCD shows Accepted and then the printer returns to the previous menu level. Note The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk shows what you have chosen, you can easily see the current settings as you look through the LCD. LEDs The LEDs are lights which show the printer status. Data LED (Green) LED indication Meaning On Data is in the printer memory. Blinking Receiving or processing data. Off No remaining data in the memory. Error LED (Orange) LED indication Meaning Blinking There is a problem with the printer. Off There is no problem with the printer. LCD The LCD shows the current printer status. When you use the buttons on the control panel, the LCD will change. If there are any problems, the LCD will show the error message, maintenance message or call service message so you will know that you need to take action. (For more information about these messages, see LCD messages on page 142.) 76 Control Panel Back light (HL-3075CW only) Light Meaning Off The printer is off or in sleep status. Green (General, Error, Setting) Ready to print Printing Warming up There is a problem with the printer. Choosing a menu (Control panel menu, Reprint menu or Direct Print menu) Pause 3 LCD messages The message on the LCD shows the current printer status during normal operation. Ready The mark indicates the wireless signal strength with four levels. ( means no signal, means weak, means middle, and means strong.) (HL-3075CW only) When an error has occurred, the type of error is displayed on the LCD message at first as shown below. Cover is open Next, the second message which shows information for clearing the error is displayed on the LCD message as shown below. Close the Top Co Printer status messages The following table shows the printer status messages during normal operation: Printer Status Message Meaning Cooling Down The printer is cooling down. Cancel Printing Canceling the job. Ignore Data Printer is ignoring data processed using the PS driver. Pause The printer has suspended its operations. Press Go to start the printer again. Please Wait The printer is warming up. The printer is carrying out the calibration process. Printing Printing. Ready Ready to print. Sleep In Sleep mode. 77 Control Panel Reprinting documents Reprinting the last job You can reprint the data from the last print job without sending it from the computer again. Note • Reprint function is not available when Secure Function Lock 2.0 (HL-3075CW only) is On. For more information about Secure Function Lock...
Эта инструкция также подходит к моделям:Принтеры - HL-3045CN (5.41 mb)