Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
¦ Auto (default) 10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected automatically. ¦ 10Base/Half ¦ 10Base/Full ¦ 100Base/Half ¦ 100Base/Full TCP/IP Use TCP/IP to make TCP/IP settings. This menu contains the following: ¦ Setup IP Address Select how to obtain an IP address. Parameters are as follows: DHCP (default) The IP address is obtained from a DHCP server on the network. Panel Use this to set the IP address from the control panel. ¦ IP Address Use this to set the IP address. [aaa.bbb.ccc.ddd] Set aaa, bbb, ccc, and ddd between 0 and 255. You cannot use the following: 224.xxx.xxx.xxx or 255.xxx.xxx.xxx 127.xxx.xxx.xxx ¦ These settings are ignored when you select DHCP in Setup IP Address. To enable the settings, select 'Panel' in 'Setup IP Address'. ¦ Specifying the wrong IP address can affect the entire network. Before setting an IP address, call your system administrator. 4 - 13 CONTROL PANEL ¦ ¦ ¦ Gateway Address Use this to set the gateway address. [aaa.bbb.ccc.ddd] Set aaa, bbb, ccc, and ddd between 0 and 255. You cannot use the following: 224.xxx.xxx.xxx or 255.xxx.xxx.xxx 127.xxx.xxx.xxx IPX Frame Type Set a frame type when you use the printer in an IPX/SPX (NetWare) environment. ¦ Auto (default) Sets the frame type automatically. ¦ 802.3 Set this to use IEEE 802.3 frame type. ¦ 802.2 Set this to use IEEE 802.3/802.2 frame types. ¦ SNAP Set this to use IEEE 802.3/802.2/SNAP frame types. ¦ Ethernet-II Set this to use Ethernet-II frame type. Protocol Choose 'Enabled' or 'Disabled' for each setting to activate or deactivate them. ¦ LPD (default: Enabled) When using TCP/IP, set LPD to 'Enabled' to print with LPD (LPR) or to 'Disabled' if you do not want to use this feature. ¦ Port 9100 (default: Enabled) When using TCP/IP, set Port 9100 to 'Enabled' to print with port 9100 (Raw Data Socket) or to 'Disabled' if you do not want to use this feature. ¦ IPP (default: Enabled) When using TCP/IP, set IPP to 'Enabled' to print with IPP (Internet Printing Protocol) or to 'Disabled' if you do not want to use this feature. Available with Windows® 2000/XP and Windows® Me. ¦ NetBIOS TCP/IP (default: Enabled) When using NetBIOS (Windows network) with TCP/IP as the transport protocol, set NetBIOS TCP/IP to 'Enabled' to print using NetBIOS or to 'Disabled' if you do not want to use this feature. ¦ NetBEUI (default: Enabled) When using NetBIOS (Windows network) with NetBEUI as the transport protocol, set NetBIOS NetBEUI to 'Enabled' to print using NetBIOS or to 'Disabled' if you do not want to use this feature. CONTROL PANEL 4 - 14 ¦ ¦ ¦ AppleTalk (default: Enabled) Set AppleTalk to 'Enabled' to print in an AppleTalk system or to 'Disabled' if you do not want to use this feature. IP Filter Use IP Filter to block the reception of data from certain locations. To block a particular IP address, specify the IP address in 'FilterX Address' (X is a number between 1 and 5) and the subnet mask in 'FilterX Mask' as numbers between 0 and 255. For the set address, select 'OFF' (default), 'Reject', or 'Accept' from 'FilterX Mode'. You can filter up to 5 addresses. Filter1 takes priority over the other filters. Therefore, when setting filters for a number of addresses, assign the addresses in ascending ranges from Filter1 to Filter5. ¦ You can also set IP filter settings by connecting to the printer using a web browser. For a detailed examples of these settings, see the Network User's Guide on the CD-ROM we provided. ¦ For more information about Web Based Management, consulte Confirming Printer Status from Your Computer en la pagina 7-21. Init NVM This resets the non-volatile memory of the printer’s network card (also known as a print server). You cannot change this setting while the printer is processing print data. ¦ YES Resets the network card's NV memory. Resetting the NV memory restores the items of the '5 Network' menu to their defaults. You must restart the printer for this setting to take effect. After programming settings, be sure to restart the printer. ¦ NO Does not reset the NV memory and returns to the menu. Adobe Protocol To set the Adobe Protocol choose one of the following: ¦ Auto (default) ¦ Standard ¦ BCP ¦ TBCP ¦ RAW 4 - 15 CONTROL PANEL USB Adobe PS Protocol To set the Adobe Protocol choose one of the following: ¦ TBCP (default) ¦ RAW ¦ Standard ¦ BCP CONTROL PANEL 4 - 16 Read this chapter to learn how to correct printer problems. If it looks like you are unable to fix the problem Turn the printer off, disconnect the power cord from the AC outlet/socket, and contact your dealer or Brother Customer Service for assistance. WARNING Do not make any changes or modifications to the equipment, as this may cause a fire or an electric shock. CAUTION Turn the printer off and disconnect the power cord from the AC outlet/socket before performing maintenance on the printer. Failure to turn the printer off and disconnect the power cord may result in an electric shock. 5 - 1 TROUBLESHOOTING Power Probl...