Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Принтеры - SCX-4650N (6.56 mb)
Принтеры - SCX-4650N (834.04 kb)
Фрагмент инструкции
If you are a Macintosh OS user, you need to enable Screen Print Settings from the Samsung Easy Printer Manager to use the Print Screen feature. 3 ID Copy Allows you to copy both sides of an ID card like a driver’s license on a single side of paper (see "ID card copying" on page 60). 4 Power/ Wakeup Turns the power on or off, or wakes up the machine from the power save mode. If you need to turn the machine off, press this button for more than three seconds. 5 Fax Switches to Fax mode. 6 Copy Switches to Copy mode. 7 Scan Switches to Scan mode. 8 Menu Opens Menu mode and scrolls through the available menus (see "Menu overview" on page 33). 9 Left/ Right Arrows Scrolls through the options available in the selected menu and increases or decreases values. 10 OK Confirms the selection on the screen. 11 Back Sends you back to the upper menu level. 12 Start Starts a job. 13 Stop/ Clear Stops an operations at any time. 14 Status LED Indicates the status of your machine (see "Understanding the status LED" on page 94). 1. Introduction 27 Control panel overview Control panel overview 14 Adjusting the control panel 15 Numeric keypad Dials a number or enters alphanumeric characters (see "Keypad letters and numbers" on page 166). 16 On Hook Dial When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using speaker phone (see "Receiving manually in Tel mode" on page 195). 17 Redial/ Pause Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause(-) into a fax number in edit mode (see "Redialing the fax number" on page 189). 18 Address Book Allows you to store frequently used fax numbers or search for stored fax numbers. 19 Display screen Shows the current status and displays prompts during an operation. Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 22). 1. Introduction 28 Turning on the machine Connect the machine to the electricity supply first. Turn the switch on if the machine has a power switch. Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 22). Power is turned on automatically. SCX-465x/4021S/465xN/4321NS Series press (Power/Wakeup) button on the control panel. If you want to turn the power off, press and hold (Power/Wakeup) button for about 3 seconds. 1. Introduction 29 Installing the driver locally A locally connected machine is a machine directly attached to your computer Insert the supplied software CD into your CD-ROM drive. 2 using the cable. If your machine is attached to a network, skip the following If the installation window does not appear, click Start > All programs > steps below and go on to installing a network connected machine’s driver (see Accessories > Run. "Installing driver over the network" on page 138). X:\Setup.exe replacing...
Эта инструкция также подходит к моделям:Принтеры - SCX-4655HN (12.13 mb)
Принтеры - SCX-4655FN (12.13 mb)
Принтеры - SCX-4655F (12.13 mb)
Принтеры - SCX-4652F (12.13 mb)