Оценок - 5, средний балл: 4.4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Electrical contacts Gently slide the print head into the holder. The print head will rest at a slight angle. Do not press it down. Remove the print head from its package. Turn the print head over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. Lower the lock lever and gently press it down until it locks into place. Raise the gray lock lever. Plug the power cord into the back of the printer and connect the other end to a power outlet. Open the front cover. The print head holder automatically moves to the center. Remove the protective tape. Write down the serial number located to the right of the print head. You will need this later to register the product. Protective tape Serial number Press the POWER button. POWER Lamp POWER Button Remove the shipping tape from the front and sides of the printer. Shipping Tape Carefully remove all items from the box. S820 Photo Printer Documentation and Software Kit Paper Rest Output Tray Pull the orange tab off the yellow ink tank (BCI-6Y), then remove and discard the plastic wrapper. Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. Insert the remaining five ink tanks into their assigned slots. Close the front cover and attach the paper rest and output tray. Protective cap Ink Tanks BCI-6C Cyan BCI-6M Magenta BCI-6BK Black Yellow BCI-6PC Photo Cyan BCI-6PM Photo Magenta S820 Print Head Power Cord (IEEE 1284 compliant) Parallel Cable For USB Cables: For Parallel Cables: Parallel Port Secure Wire Clips Parallel Cable USB Port USB Cable Continue with Step 6 on side two. Turn the printer off. Connect one end of the USB cable to the computer, the other to the printer. Turn the printer off. Connect one end of the parallel cable to the computer, the other to the printer. IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 1 2 3 4 1 5 4 3 1 2 1 2 3 4 5 1 2 2 1 1 6 Install the Printer Driver (Macintosh®) Macintosh 1 Install the Printer Driver (Macintosh®)6 Macintosh Be sure to TURN THE PRINTER OFF before continuing. NOTE: For Windows® XP, Windows 2000 or Windows NT® 4.0, log on to Windows as a member of the Administrators group before continuing. IMPORTANT: If you see the Add New Hardware Wizard, click Cancel. Close any open software applications, then insert the “S820 Setup Software & User's Guide” CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup.exe, where D is your CD-ROM drive. Read the License Agreement, then click Yes, if you agree. When the main menu appears, make sure that the Printer Driver is selected, then click Install. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. When the Printer Port window appears, TURN THE PRINTER ON so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the “S820 Quick Start Guide” for instructions. When the Terminate Installation window appears, click OK. Follow the on-screen instructions to continue with Product Registration. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the print head. When the main menu appears, make sure that Application is selected, then click Install. When the Terminate Installation window appears, click OK, then Exit. NOTE: For more information, refer to the “S820 Quick Start Guide” or view the electronic documentation on the CD-ROM. Click Yes if you are prompted to restart your computer. To insure highest quality output, continue with Step 7 Align the Print Head. 1 2 3 4 6 7 8 5 9 10 11 POWER Lamp off POWER Button Windows Install the Printer Driver (Windows®)6 Part no. QA7-1935-V01 © 2002 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. 40-42246-0302 Printed in Thailand Add a stack of blank paper to the sheet feeder. Start the alignment procedure. Windows: a. Click Start, then Settings, then Printers. NOTE: For Windows XP, select Start, then Control Panel. Then click on Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon S820 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When prompted if the pattern printed successfully, click Yes. Macintosh: a. From the File menu in a software application, clic...