Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. 7 8 6 9 10 Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically. When the Printer Port window appears, TURN THE PRINTER ON so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the S300 Quick Start Guide for instructions. When the Terminate Installation window appears, click OK. If you are prompted to restart the computer, click Yes. When the installation and registration process has completed, click Exit. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. You will need to align the printhead before printing. Continue with step 7 Align the Printhead. NOTE: You can now install the BJ Solution software. Be sure the printer is off before continuing. 1 Close any open software applications, then insert the S300 Setup Software & User's Guide CD-ROM. The setup program should run automatically. NOTE: For Windows 2000, log on to Windows as an Administrator before continuing. IMPORTANT: If you see this screen, click Cancel and continue. POWER Light POWER Button 2 3 Read the Welcome screen, then click Next. NOTE: If the setup program does not run, click Start, then Run, then type x:\msetup.exe, where x is your CD-ROM drive. 4 Read the License Agreement, then click Yes. 5 When the main menu appears, click Install Software. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. Windows 6 Install the Printer Driver (Windows®) 6 Install the Printer Driver (Macintosh®) 7 Align the Printhead Macintosh Part no. QA7-1635 © 2001 Canon U.S.A. Inc. Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN THAILAND 1 2 3 Place a stack of blank paper in the paper rest. Start the alignment procedure. d. When asked to start printhead alignment, click OK. e. Follow the on-screen instructions to complete printhead alignment. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. e. Follow the on-screen instructions to complete printhead alignment. Click OK (Windows) or Close (Macintosh) when finished. Windows: a. Click Start, then Settings, then Printers. b. Right-click the Canon S300 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. 7 8 9 After the computer restarts, select the Apple menu, then Chooser. Click the S300 icon in the Chooser. The printer name will highlight and move to the right panel. NOTE: To use the BJ Print Monitor, set the Backgrounding button to the On position. Close the Chooser. NOTE: You can now install the BJ Solution software. 10 You will need to align the printhead before printing. Continue with step 7 Align the Printhead. 1 2 3 4 5 6 Insert the S300 Setup Software & User's Guide CD-ROM. Open the printer driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement, then click Accept. Click Install. The printer driver will load automatically. If the message "No other applications can be running..." displays, click Continue. When the installation and registration process has completed, TURN THE PRINTER ON, then click Restart. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. 7 8 6 9 10 Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically. When the Printer Port window appears, TURN THE PRINTER ON so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the S300 Quick Start Guide for instructions. When the Terminate Installation window appears, click OK. If you are prompted to restart the computer, click Yes. When the installation and registration process has completed, click Exit. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. You will need to align the printhead before printing. Con...