Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Connect one end of a USB cable (not included) to the computer, the other to the printer. 3 Continue with Step 6 on side two. IMPORTANT: Be sure printer is unplugged before continuing, or the computer will attempt to install the printer driver before the printer is ready. USB Port USB Cable USB Port Ensure that the blue lock lever is raised. Gently slide the printhead into the holder until it is securely seated. Do not press it down. Lower the lock lever until it locks into place. Close the front cover and attach the paper rest and output tray. Place a stack of blank paper (up to 50 sheets) in the paper rest. 1 2 3 4 5 Electrical contacts Remove the printhead from its package. NOTE: Do not touch the electrical contacts. 1 2 Remove the protective cap and tape from the printhead. Shipping Tape Serial number The printer automatically turns on when the printer is plugged in. 4 Open the front cover. The printhead holder automatically moves to the center. Plug the power cord into the back of the printer and connect the other end to a power outlet. Remove the shipping tape from the front, sides and inside of the printer. Write down the serial number located to the right of the printhead. You will need this later to register the product. 1 2 3 Paper Rest Output Tray S200 Series Color Bubble Jet Printer Documentation and Software Kit Power Cord Printhead (ink tanks are included) 1 Carefully remove all items from the box. 1 Unpack the Printer 2 Prepare the Printer 3 Prepare the Printhead 4 Install Printhead 5 Connect the Printer To Your Computer Macintosh After the computer restarts, select the Apple menu, then Chooser. Click the S200 icon in the Chooser. The printer name will highlight and move to the right panel. NOTE: To use the BJ Print Monitor, set the Backgrounding button to the On position. Close the Chooser. 8 9 7 6 Open the printer driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement, then click Accept if you agree. Click Install. The printer driver will load automatically. If the message "No other applications can be running..." displays, click Continue. When the installation and registration process has completed, click Restart. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead holder. Be sure the printer is plugged in. Turn your Mac on, then insert the S200 Setup Software & User's Guide CD-ROM. 5 4 3 1 2 Macintosh After the computer restarts, select the Apple menu, then Chooser. Click the S200 icon in the Chooser. The printer name will highlight and move to the right panel. NOTE: To use the BJ Print Monitor, set the Backgrounding button to the On position. Close the Chooser. 8 9 7 6 Open the printer driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement, then click Accept if you agree. Click Install. The printer driver will load automatically. If the message "No other applications can be running..." displays, click Continue. When the installation and registration process has completed, click Restart. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead holder. Be sure the printer is plugged in. Turn your Mac on, then insert the S200 Setup Software & User's Guide CD-ROM. 5 4 3 1 2 6 Install the Printer Driver (Macintosh®) When the Printer connection destination window appears, PLUG THE PRINTER IN so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the S200 Quick Start Guide for instructions. When the Installation Complete window appears, click OK. When the installation and registration process has completed, click Exit. If you are prompted to restart the computer, click Yes. 6 7 8 NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead holder. Be sure the printer is unplugged and your computer is turned off before continuing. Close any open software applications, including any virus detection programs, then insert the S200 Setup Software & User's Guide CD-ROM. The setup program should run automatically. NOTE: For Windows XPTM and 2000, log on to Windows as an Administrator before continuing. Driver features and screen shots shown here may differ from your screen depending on the version of Windows you are using. NOTE: If the setup program does not run, click Start, then Run, then type X:\msetup.exe, where X is your CD-ROM drive. Read the License Agreement, then click Yes if you agree. When the main menu appears, ensure that the Printer Driver is selected, then click Install. NOTE: If you are prompted to ...