Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
These must be observed for safe operation. Also read the Safety Precautions in the User’s Guide. Observe the warnings and cautions to avoid personal injury or damage to the printer. Trademark Notices •Canon® is a registered trademark of Canon Inc. •BJ™ is a trademark of Canon Inc. •Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the U.S. and other countries. • Apple, Mac, Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. • All other trademarks and registered trademarks appearing in this Quick Start Guide are the property of their respective owners. Copyright ©2002 CANON INC. All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever without the express written permission. Setting Up 1 Preparing the Printer 1 1111Place the printer on a flat surface. 2 2222Remove the tape from the printer as shown. The tape position is subject to change. 3 3333Open the front cover and remove the shipping material. 4 4444Close the front cover. 2 Connecting the Printer to the Computer Use a USB cable. Recommended: Canon or other computer manufacturer cable, up to 5 meters in length. • If your computer has an earth connection, make sure that this is attached. • If you do not intend to use the printer for a long period of time, unplug the power cord from the power outlet after turning off the printer. Follow the steps below to install the printer drivercorrectly. 1 1111Ensure the printer and the computer are switched off. 2 2222Connect the cable. If the Add New Hardware Wizard or Found New Hardware Wizard screen appears when carrying out the following operations, click Cancel and turn off the computer. 3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord. • Never use any power supply other than the standard power supply available in the country of purchase. Using the incorrect voltage and frequency could cause a fire or electric shock. • Always push the plug all the way into the power outlet. • ........Installing the Print Head ON 1 1111 Plug the printer in. print head holder 2 2222Turn on the printer. Do NOT turn on the computer yet. The POWER lamp flashes and the printer begins to operate. Wait until the POWER lamp remains fully lit. 3 3333Open the front cover. The print head holder moves to the center. 4 4444Raise the lock lever. Do not touch internal parts other than the lock lever. 5 5555 Remove the protective cap from the print head. print head electrical • Do not touch the print nozzles contacts head nozzles or electrical contacts. • Do not attempt to reattach the protective cap once it has been removed. print head 6 6666 Place the print head in the holder. print head holder 7 7777Lock the print head into place bylowering the lever. Do not touch the lock lever once the print head has been installed. • ........Installing the Ink Tanks • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. 1 1111Take out the black ink tank. protective cap 2 2222Hold the ink tank as shown in the diagram and remove the protective cap. ink port • Do not touch the ink port. • Do not attempt to reattach the protective cap once it has been removed. 3 3333 Insert the black ink tank into the right- hand slot. 4 4444Press the tab until it clicks into place. 5 5555Use the same procedure to install the color ink tank in the left hand slot. 6 6666Close the front cover. Wait until the POWER lamp remains fully lit (about 60 seconds). 4 Loading Paper • ........Loading A4 (Letter) Size Plain Paper 1 1111Pull out the paper rest and the outputtray as shown. Be careful not to jam your finger in the circular hole of the paper rest. print side 2 2222To avoid paper jams, fan the stack toremove static cling, then align theedges of the stack by tapping it on a flat surface. 3 3333Load the paper, aligning it with the rightside of the sheet feeder. You can load up to 100 sheets of plain paper. Do not exceed this limit. 4 4444Press the paper guide and slide itagainst the left side of the stack of paper. You now need to install the printer driver: Windows: Go to page 8 Macintosh: Go to page 10 5 Installing the Printer Driver • ........Installing the Printer Driver – Windows • Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be correctly installed. • The screens below refer to Windows XP installation. Screen may differ depending on the operating system you are using. • When installing the printer driver in Windows XP or Windows 2000, log on to the system as a member of the Administrators group. • The Setup Software & User’s Guide CD-ROM contains the application software, Easy-PhotoPrint,...