Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
3 Attach the extension to the cassette.The slots . are keyed and must be inserted at a 90° angle. Once inserted, fold the extension as shown .. To load Legal-size paper: Pull the blue tab . and extend the cassette . as far as it will go. Keep the rear paper end guide to LTR size mark. If you are not using Legal-size paper, skip to the next step without extending the cassette. 1 Insert the output tray into the front slot on the machine. 2 Pull out the paper cassette. 4 Pinch and slide the rear paper end guide to match the size of paper. 7 Even out the edges of the paper stack. Make sure the height of the stack does not exceed the limit marks and that the side edges of the stack are below the hooks (B). 9 Insert the tabs on the extension cover into the slots . on the back of the machine, and carefully lower the cover . until it sits on the cassette extension beneath it. 5 Load the paper into the cassette.Make sure the paper stack sits below the hooks (A). 6 Pinch and slide the side paper end guides to match the size of paper. A B 8 Insert the paper cassette back into the machine as far as it will go. NOTE . If you do not completely insert the cassette into the machine, paper jams may occur. IMPORTANT . Do not load paper from the back of the machine.Doing so may damage the paper feeding assembly inside the machine. Connect the power cord. 1 Plug the power cord into the rear socket ..Then connect the other end to the wall outlet .. 2 The machine takes up to 3 minutes to warm up. Once it is warmed up, the standby display appears in the LCD. IMPORTANT . For important safety instructions on installation and handling of the machine, see “Important Safety Instructions” in the Basic Guide. NOTE . Make sure the correct paper size is specified in the machine.For details,see Chapter 2,“Paper Handling,”in the Basic Guide. Install the software. IMPORTANT . Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel] and disconnect the USB cable. NOTE . The instructions below are for Windows XP. For Windows 98/Me/2000, see the Software Guide (included in the User Software CD). . For Windows 2000/XP, log on as Administrator to install the software. . The machine uses the same driver software used for MF3110. 1 Turn on your computer. 2 Quit any open applications, including virus checking software. 3 Insert the User Software CD into the CD-ROM drive. 4 When the MF Setup screen appears, click [Install MF Drivers]. . If the MF Setup screen is not displayed, on the Windows desktop, click [start] . [My Computer]. Open the CD-ROM icon, then double-click [Setup (Setup.exe)]. 5 When the MF Drivers Setup screen appears, click [Yes] and follow the instructions on the screen. 6 When the installation is complete, click [Finish] to close the MF Drivers Setup screen. 7 On the MF Setup screen, click [Install MF Toolbox]. 8 When the MF Toolbox Setup screen appears, click [Next] and follow the instructions on the screen. NOTE . Before installing MF Toolbox, make sure that all other applications are closed and that any anti-virus software on your computer is disabled. 9 When the installation is complete, click [Finish] to close the MF Toolbox Setup screen. Connect the machine to your computer. 1 Make sure the machine’s power is turned on. Connect the cable to the USB port on the back of the machine. Then connect the other end of the cable to the USB port on your computer. 2 After the installation is complete, click [Exit] to close the MF Setup screen. Remove the User Software CD from the CD-ROM drive and store it in a safe place. NOTE . If you would like to install the optional Presto! PageManager file management software and/or OmniPage OCR software, click [Install Applications] and follow the instructions on the screen. . You can also click [Read Manuals] to read PDF manuals in the User Software CD. To view the manuals in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe Systems Incorporated website (Congratulations! You have now completed the machine setup. Where to go from here... Once you have completed all steps in this document, see the Basic Guide for basic operations of all functions of your machine. For information on the driver software, see the Software Guide (included in the User Software CD). NOTE . Remember to register your machine to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 1-800 OK CANON U.S.A. CUSTOMERS CANADA CUSTOMERS Part no. FA7-7203 (000) ©2005 Canon Inc. Canon and imageCLASS are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change witho...