Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(> p. 4-16) Wait until the machine begins redialing. 3 Press 4 (–) to cancel redialing. • If you change your mind and want to continue Press Stop/Reset. redialing, press e (+). • The machine prints an ERROR TX REPORT. cancel. • The machine asks you to confirm that you want to (> p. 7-3) CANCEL DURING TX/RX? < YES NO > Sequential Broadcasting Sequential Broadcasting Sending a Document to More Than One Destination This feature allows you to scan a document once and send it to several destinations. You can send the document to a maximum of 122 destinations using a combination of the following dialing methods: • One-touch speed dialing: up to 12 destinations • Coded speed dialing: up to 100 destinations • Regular dialing (using the numeric keys) or redialing: 10 destinations You can enter the destinations in any order. (Be sure to press Set after your entry with the numeric keys.) • If you frequently send documents to the same group of destinations, you can group them and register NOTE these numbers for group dialing. You can register up to 111 fax numbers with group dialing and send the same document to these numbers. (> p. 3-7) • The Function key will light up by pressing Function to be able to operate Clear. 1 2 3 Press FAX to set to Fax Mode. Prepare the document and load it face down in the ADF. MEM IN USE 0% Ex: (Currently used memory) DOCUMENT READY (Standby to scan) • If you use the platen glass to send a document > p. 4-6. • To adjust the resolution, > p. 4-1. • To adjust the contrast, > p. 9-4. Enter up to 122 fax numbers using any of the following methods: . One-touch speed dialing: Press the desired one-touch speed dialing key(s). TEL= 2 50921 04 Canon ITALIA Ex: . Coded speed dialing: Press Coded Dial, then use the numeric keys to enter the two-digit code. Repeat for other codes. TEL= 149392525 A02 Canon FRANCE Ex: . Regular dialing: Use the numeric keys to enter the fax number, then press Set. TEL= 9057951111 Ex: • If you enter an incorrect destination, press NOTE Clear to delete it. • You must enter the second fax number within five seconds of entering the first one. After that, all subsequent fax numbers must be entered within 10 seconds of each other. If you wait longer than this, the machine automatically begins scanning the document for sending. If you prefer the machine not to do this, disable the TIME OUTsetting. (> p. 9-6) • If you want to review the numbers you entered, use 4 (–) or e (+) to scroll through the numbers. 4 Sending 4 Press Start. • If a number is busy, the machine will • After the scanning is finished, the machine starts NOTE continue sending to the other destinations to dial the number. and then redial the number that was busy. • The machine will first send the document to the one-touch speed dialing destinations, then the coded speed dialing destinations, and finally to the destination dialed using regular dialing. • If you prefer the machine never to scan a document automatically after a few seconds, disable the TIME OUTsetting. (> p. 9-6) • To cancel sending, press Stop/Reset then press 4 (–). Sending to all destinations specified in step 3 will be canceled. You cannot cancel just one destination. After canceling, the machine will print a MULTI TX/RX REPORT. (> p. 7-4) Delayed Sending Delayed Sending 1 2 3 4 You can use your machine to send faxes at a preset time. This feature is called Delayed sending or Timer sending. By using this feature, you can take advantage of lower long distance rates at night, for example. You can set up to 122 destinations, and up to 20 reservations of delayed sending. • You can perform other tasks even when you have set the machine for delayed sending. NOTE • You can operate Book Sending, Delayed Transmission or Clear when the Function key is lit. If the Function key is not lit, press it. However, you do not need to press Function in step 1 or 2 to execute the Delayed Transmission function or Book Sending function if DELAYED TX or BOOK SENDING is programmed in PROGRAM 1-TOUCH KEY. (> p. 9-4) Prepare the document and place it on the platen glass or load it face down in the ADF. • When using the platen glass, press NOTE Function and then Book Sending, and select the document size with 4 (–) or e (+). In this case, you do not need to press 5 Press Set. DELAYED TX SELECT LOCATIONS TEL= 6 Enter a destination using a one-touch speed Function in step 2. dialing key, coded speed dialing keys, Redial/Pause key or the numeric keys. Press Function. • You can use the one-touch speed dialing Press Delayed Transmission. NOTE key when the Function key is not lit. If the Function key is lit, press it. Use the numeric keys to enter the • If you enter an incorrect destination, press reservation time to send faxes. Clear to delete it. 4 Sending Ex: DELAYED TX TX TIME SETTNG 15:30 7 Press Start to begin scanning. • When you use speed dialing, scanning starts automatically without pressing Start when the TIME OUTsetting is on. (> p. 9-6) • When the time you set i...