Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Check that y Machine with cabinet stand Stamp car Paper size notice cards (2) Toner cartridge (in carton) Paper size labels (2) Power cord Telephone cable Paper size plates (2) for the Machine Destination labels for one-touch speed dialing keys (2) Set-Up SheetSet-Up Sheet Thank you for purchasing the C To get your machine r tions in this sheet before referring to any other documentation. Unpack the machine and its components. Check that y Machine with cabinet stand Stamp car Paper size notice cards (2) Toner cartridge (in carton) Paper size labels (2) Power cord Telephone cable Paper size plates (2) for the Machine Destination labels for one-touch speed dialing keys (2) Documentation Set-Up Sheet for the Machine (This Document) Refer to this document first to install and set up your new machine. Set-Up Sheet for Networking and Printing* Refer to this document to set up the machine for network and print functions. Basic Guide This manual explains the basic operations of all functions of the machine. Keep this guide handy for easy reference. Reference Guide This manual covers machine settings, common operations, maintenance, and troubleshooting. Copying Guide This manual explains the copy function of the machine. Facsimile Guide This manual explains the fax function of the machine. Sending Guide* This manual explains the I-Fax function of the machine. Registration Card Limited Warranty Note CD-ROM* imageCLASS 2300 Driver Software imageCLASS 2300 Network User Software NOTE An asterisk (*) denotes the item only supplied with the Network Model. Printer and network cables are not included. Remove the shipping materials. 1 Remove all the shipping tape and foam blocks on the outside of the machine. IMPORTANT When you transport the machine, you need to screw the metal pin back into the underside of the machine. Install the stamp cartridge. 2 Remove the clear protective sheet on the LCD display. 4 Remove the shipping tape on the right side and unscrew the metal pin on the underside of the machine. 5 Keep the metal pin in the pin slot on the black panel 6 Open the stack bypass and remove behind the front cover. the tape holding the auxiliary tray and the tray extension. 7 Pull out the left cover and remove the tape on the inside. 3 Lift the feeder and remove the lining material on the platen glass. 1 Pull up the latch to open the feeder cover. 3 Use the supplied tweezers to align the small stubs on the side of the stamp cartridge with the indentations on the stamp receptacle, and push down the stamp until it snaps into place. Close the inner cover and the feeder cover. 2 Open the black inner cover. Install the toner cartridge. 1 Open the stack bypass. 2 Slide out the left cover of the stack bypass. 3 Remove the toner cartridge from the bag. Keep the bag in a safe place. 1 1 2 4 Hold the cartridge with both hands and slowly shake it sideways 1and then back and forth 2to distribute the toner inside the cartridge. 5 Hold the cartridge on a flat stable surface with one hand, and pull out the seal completely with the other hand. Tabs Protective cover 1 6 Remove the tape holding the orange protective cover, and pull the release tabs on the cover to detach it from the cartridge. IMPORTANT Do not touch the blue-green drum surface inside the toner cartridge. 7 Hold the cartridge by its handles (marked with blue) and insert it in the machine horizontally as far as it will go. 8 Close the left cover and the stack bypass. LTR U2 U3 B5 LGL A5 A4 A4 A3 U1 B4 LTR STMT B5 11X17 LTR Unlock Lock 3 Detach the blue end guide by moving it down to the left then pulling up, and attach it again at the mark for the desired paper size. 4 Insert the paper size notice card in the card slot located on the inside front of the drawer. 7 Set the paper size detector lever to match the size of the paper you are loading. 5 Attach the appropriate paper size label to the paper size plate, and insert the plate in the slot at the drawer front. 6 Lift up the blue lock lever and slide the side guide to match the size of the paper you are loading. Lower the lever again to lock the side guide. 8 Load the paper into the drawer. Make sure the paper size setting of the drawer matches the size of the paper. 9 Even out the edges of the paper stack. Make sure the height of the paper stack does not exceed the limit mark . 10 Push the paper drawer back into the machine. Repeat the steps above for the bottom drawer as well. Load paper. 1 Pull out the paper drawer until it stops. 1 2 2 Remove the black wire 1and shipping tag, and the orange tape 2. NOTE You can skip steps 3, 6 and 7 if you are loading letter size paper in the portrait orientation (LTR ). Note that some paper sizes have both portrait ( ) and landscape ( ) settings. Using the operation panel Use the following keys on the operation panel to set up the machine for the fax function as explained on the following pages. 1 2 3 4 5 6 7 8 9 ID C 0 F4F1 F2 F3 OKBACK @. GHI PRS...