Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
With the PhotoThru program included in the CD-ROM, you can print all manner of useful and entertaining images. • Connecting your printer to a Windows-based PC • Installing the program for Windows • Deleting the PhotoThru program • Selecting your Photo printer as the default printer in Windows • Printing from a Windows-based computer • Setting up the printer in Windows • Printing with the PhotoThru program in Windows • Installing the program for Macintosh • Setting up the printer in Macintosh • Printing from a Macintosh • Printing using PhotoThru program in Macintosh • Using MSC(Mass Storage Class) function(For SPP-2040 Series only) • Printing with Bluetooth (Optional: SPP-00BA) Connecting your printer to a Windows-based PC Connect the Photo printer to the PC with the USB cable supplied with your digital camera. You can connect the Photo printer only with the USB cable. 1 Connect the power cable to the printer. If the power cable is connected, press the On/Off button to turn the printer on. Connecting your printer to a Windows-based PC Connect the Photo printer to the PC with the USB cable supplied with your digital camera. You can connect the Photo printer only with the USB cable. 1 Connect the power cable to the printer. If the power cable is connected, press the On/Off button to turn the printer on. For details about the power connection, see page 2.4-Connecting the power cord. If the power cable is already connected, make sure that the printer is turned on. 2 Connect the USB cable to printer's USB cable port. Make sure you insert the USB cable in the proper port. 3 Connect the USB cable to computer's USB cable port. Make sure you insert the USB cable in the proper port. The position of the USB port varies depending on the PC. 5.2 5.3 Installing the program for Windows Install the program on your Windows-based PC after loading paper and connecting cables. You should install the program version that was supplied with the printer. System requirements Before you begin, ensure that your system meets the minimum system requirements. •Supported Windows Operating System: Windows 98/Me/2000/XP (32bit) •Windows 98/Me - Processor: Pentium III 400MHz or more (Pentium III 933 MHz recommended) - Memory: 128MB or more (256MB recommended) - Free hard disk space: 500MB or more (1GB recommended) - Internet Explorer: 5.0 or higher (6.0 recommended) •Windows 2000/XP (32bit) - Processor: Pentium III 1GHz or more (Pentium IV 1.5GHz recommended) - Memory: 256MB or more (512MB recommended) - Free hard disk space: 1GB or more (5GB recommended) - Internet Explorer: 5.0 or higher (6.0 recommended) You must log on as the account administrator to install and delete in Windows 2000/XP. 5.3 Installing the program for Windows Install the program on your Windows-based PC after loading paper and connecting cables. You should install the program version that was supplied with the printer. System requirements Before you begin, ensure that your system meets the minimum system requirements. •Supported Windows Operating System: Windows 98/Me/2000/XP (32bit) •Windows 98/Me - Processor: Pentium III 400MHz or more (Pentium III 933 MHz recommended) - Memory: 128MB or more (256MB recommended) - Free hard disk space: 500MB or more (1GB recommended) - Internet Explorer: 5.0 or higher (6.0 recommended) •Windows 2000/XP (32bit) - Processor: Pentium III 1GHz or more (Pentium IV 1.5GHz recommended) - Memory: 256MB or more (512MB recommended) - Free hard disk space: 1GB or more (5GB recommended) - Internet Explorer: 5.0 or higher (6.0 recommended) You must log on as the account administrator to install and delete in Windows 2000/XP. Installing the program for Windows Installing the program 1 Quit all programs. 2 Turn on your PC and click 'Cancel' when the 'Found New Hardware Wizard' screen appears. 3 Insert the supplied software program CD(label-side up) into into your CD-ROM drive. The installation window appears. If the installation window does not appear, eject the CD-ROM and insert it again. Or click 'Start' and then 'Run.' Type X:setup.exe, replacing 'X' with the letter of your drive and click OK. If your printer is not already connected to the computer, the following window opens. . Windows XP screen Connect your printer to the computer and turn the machine on. Then click 'Next.' 4 Select 'Typical'. If you select 'Typical,' 'Printer,' 'Photothru' and 'Status Monitor' are all installed. If you want to install only selected functions, select ‘Custom.’ . Windows XP screen 5.4 Installing the program for Windows If you select 'Custom,' a screen with the list of all program elements appears. Select the desired features and click 'Next.' If you select 'View User's Guide,' the PDF version of the user's guide will come up. If the Adobe Acrobat program is not installed, it is installed automatically. If you select ‘PhotoThru,’ only the PhotoThru program will be installed. 'Printer' is selected in default and you don't have to select it. 5 After the installat...
Эта инструкция также подходит к моделям:Принтеры - SPP-2020 (4.63 mb)
Принтеры - SPP-2020A (4.63 mb)
Принтеры - SPP-2020B (4.63 mb)
Принтеры - SPP-2020R (4.63 mb)