Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Load a sheet of print material and press the On Line/ Continue button. You need to press the button for each page. Ready [Color] Low Toner The corresponding toner cartridge in your printer is low on toner. Redistribute the toner in the corresponding toner cartridge, Press Continue Button The printer is waiting for the user’s action before printing from the Multi-purpose Tray using the manual feed mode. Load a sheet of print material and press the On Line/ Continue button. You need to press the button for each page. Ready [Color] Low Toner The corresponding toner cartridge in your printer is low on toner. Redistribute the toner in the corresponding toner cartridge, referring to page 6.2. Ready IP Conflict The IP address of the printer conflicts with other devices on the network. Contact your network administrator and choose an address within your subnet which will not conflict with any other devices. Rear Fan Error A problem has occurred in the Rear Fan of the printer. Unplug the power cord and plug it in again. If the problem persists, call for service. Replace [Color] Toner The corresponding toner cartridge in your printer is nearly empty. However, the printer continues printing, even though print quality is not optimal. When the ‘[Color] Toner Empty’ message appears, the printer will stop printing. If necessary, replace the corresponding toner cartridge with a new one. See page 6.4. Replace Fuser The life span of the fuser unit has expired and the printer will stop printing until a new fuser unit is placed into the printer. Replace the fuser unit with a new one. See page 6.7. Replace Fuser Soon The life span of the fuser unit will expire soon. When “Replace Fuser” message appears, the printer will stop printing. Replace the fuser unit. Replace MP Pick-roller The life span of the MP pickup roller has expired. Contact a service representative. Replace Transfer Belt The life span of the paper transfer belt has expired and the printer will stop printing until a new paper transfer belt is placed into the printer. Replace the paper transfer belt with a new one. See page 6.5. Message Status Do this... Replace Transfer Belt Soon The life span of the paper transfer belt will expire soon. When the “Replace Transfer Belt” message appears, the printer will stop printing. Replace the paper transfer belt. Replace Tray1 Pick-roller The life span of the Tray1 pickup roller has expired. Contact a service representative. Replace Tray2 Pick-roller The life span of the Tray2 pickup roller has expired. Contact a service representative. SMPS Fan Error A problem has occurred in the SMPS Fan of the printer. Unplug the power cord and plug it in again. If the problem persists, call for service. Tray2 Error The optional Tray2 is not properly installed or connected to the printer. After turn the printer off and then back on, reinstall the optional Tray2. If the message persists, contact a service representative. Tray2 Jam Cover Open The optional Tray2 jam cover is open. Close the Tray2 cover firmly. Message Status Do this... 7.16 Solving Problems Common Windows Problems Common Linux Problems Problem Possible Cause and Solution “File in Use” message Exit all software applications. Remove all software appears during from the StartUp Group, then restart Windows. installation. Reinstall the printer driver. “Error Writing to LPTx” message appears. “General Protection Fault”, “Exception OE”, “Spool32”, or “Illegal Operation” messages appear. “Fail To Print”, “A printer timeout error occurred.” messages appear. • Ensure that all cables are connected correctly and the printer is on. • If bi-directional communication is not turned on in the driver, will also cause this message. Close all other applications, reboot Windows and try printing again. These messages may appear during printing. Just keep waiting until the printer finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. NOTE: Refer to the Microsoft Windows 98SE/Me/NT 4.0/2000/ 2003/XP User’s Guide that came with your PC for further information on Windows error messages. Common Macintosh Problems Problem Possible Cause and Solution The printer does not You should change the Print Method option to print a document from Print as Image when you print from Acrobat Acrobat Reader. Reader. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Update your Mac OS to OS 10.3.3 or higher. Problem Possible Cause and Solution I can’t change settings in the configuration tool. You need to have administrator privileges to be able to change global settings. I am using the KDE You may not have the GTK libraries installed. These desktop but the usually come with most Linux distributions, but you configuration tool and may have to install them manually. Refer to your LLPR won’t start. distribution’s installation manual for more details about installing addition...
Эта инструкция также подходит к моделям:Принтеры - CLP-600 (5.78 mb)
Принтеры - CLP-600N (5.78 mb)
Принтеры - CLP-600NG (5.78 mb)