Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Printer drivers need to be installed on both computers for this operation. Double connections from a printer to a single computer through the USB ports can result in serious damage to the printer and computer. 6 Power receptacle 9 Tray back cover 7 6 1 3 2 4 5 8 9 Control panel overview 1. Introduction 17 1 2 3 4 8 7 6 5 9 10 4 (Back) Sends you back to the upper menu level. 5 Numeric keypad Use the keypad to enter numbers and characters. It is useful for entering IP addresses. (see 171. Introduction Control panel overview 1 2 3 4 8 7 6 5 9 10 4 (Back) Sends you back to the upper menu level. 5 Numeric keypad Use the keypad to enter numbers and characters. It is useful for entering IP addresses. (see "Entering characters using the number keypad" on page 24). 6 (Cancel) Stops an operation at any time. 7 (Power) You can turn the power on and off with this button. 8 (Status LED) Shows the status of your machine (see "Status LED" on page 70). 9 Eco Enters eco mode to reduce toner consumption and paper usage (see "Eco options" on page 43). 10 Arrows Navigates available values by moving to the next or previous options. 1 Display Shows the current status and prompts during an operation. 2 (Menu) Enters menu mode and scrolls through the available menus. 3 OK Confirms the selection on the display. Turning on the machine 1. Introduction 18 1 Connect the machine to the electricity supply first. Turn on the power switch. 2 If it is turned off, press the (Power) button, then release. Installing the driver locally 1. Introduction 19 A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, The software CD should automatically run and an installation window will appear. 191. Introduction Installing the driver locally A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, The software CD should automatically run and an installation window will appear. skip the following steps below and go on to installing a network connected machine’s driver (see Advanced Guide). Select Install Now. 3 • If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced guide. • The installation window in this User’s Guide may differ depending on the machine and interface in use. •Selecting Custom Installation allows you to choose which programs to install. • Only use a USB cable no longer than 3 meters (118 inches ). 4 4 .... Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 1 1 Make sure that the machine is connected to your computer and powered on. Follow the instructions in the installation window. 5 Windows If the “Found New Hardware Wizard” appears during the installation procedure, click Cancel to close the window. Insert the supplied software CD into your CD-ROM drive. 201. Introduction Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. ....Windows 201. Introduction Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. ....Windows 1 1 Make sure that the machine is connected to your computer 2 2 and powered on. From the Start menu, select Programs or All Programs > 3 3 Samsung Printers > your printer driver name > Uninstall. Follow the instructions in the installation window. 4 4 Insert the software CD into your CD-ROM drive and install the driver again (see "Installing the driver locally" on page 19). 2. Learning the basic usage After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter provides information about the overall menu structure and the basic setup options. • 2. Learning the basic usage After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter provides information about the overall menu structure and the basic setup options. • Menu overview 22 • Entering characters using the number keypad 24 •Printing a demo page 25 • Changing the display language 26 • Media and tray 27 • Basic printing 39 machine or use the machine’s functions. • These menus can be accessed by pressing (Menu) button. Press the arrows until the needed menu item appears and press OK. • An asterisk (*) appears next to the currently selected menu. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. • Some menu names may differ from your machine depending on its options or the models. 222. Learning the basic usage Menu overview The control panel provides access to various menus to set up the Items Options Information Menu Map Configuration Supplies Info. Demo Page PCL Font PS Font EPSON Font Usage Counter Account Layout Orientation Common Margin MP Tr...
Эта инструкция также подходит к моделям:Принтеры - ML-3750ND (13.08 mb)
Принтеры - ML-3750ND/ALG (13.08 mb)
Принтеры - ML-3750ND/SAU (13.08 mb)
Принтеры - ML-3750ND/STS (13.08 mb)