Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
3 Close the document cover. Adjusting the Document Resolution The default document settings produce good results when using typical text-based documents. However, if you send documents that are of a poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax. 1 Press Resolution on the control panel. 2 By pressing Resolution or the scroll button ( or ), you can choose from Standard, Fine, Super Fine, Photo, and Color. 3 When the mode you want to use displays, press Enter to make your selection. The document types recommended for the resolution settings are described in the table below: NOTES: • For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine. • When your machine is set to Super Fine resolution and the fax machine with which you are communicating does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine. Mode Recommended for: Standard Documents with normal sized characters. Fine Documents containing small characters or thin lines or documents printed using a dot-matrix printer. Super Fine Documents containing extremely fine detail. Super Fine mode is enabled only if the machine with which you are communicating also supports the Super Fine resolution. See the notes below. Photo Documents containing shades of gray or photographs. Color Documents with colors. Sending a color fax is enabled only if the machine with which you are communicating supports color fax reception and you send the fax manually. In this mode, memory transmission is not available. Sending a Fax Automatically 1 Load the document(s) face up into the ADF. OR Place a single document face down on the document glass. For details about loading a document, see ?$paratext>? on page 7.3. 2 Adjust the document resolution to suit your fax needs (see ?$paratext>? on page 7.4). If you need to change the darkness, see ?$paratext>? on page 7.2. 3 Enter the remote fax phone number using the number keypad. You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see ?$paratext>? on page 7.8. 4 Press Start. 5 When a document is placed on the document glass, the display shows “Another Page?” on the top line after the document is scanned into the memory. If you have the next page, remove the scanned page and place the next page on the glass and select “1:Yes”. Repeat as necessary. After all of the pages are scanned, select “2:No” when the display shows “Another Page?”. 6 The number is dialed and then the machine begins sending the fax when the receiving fax machine is ready. NOTE: When you want to cancel a fax job, press Stop/Clear at any time while sending. 7.4 Faxing (Only for SCX-4521F/ SCX-4521FR) Sending a Fax Manually 1 Load the document(s) face up into the ADF. OR Place a single document face down on the document glass. For details about loading a document, see ?$paratext>? on page 7.3. 2 Adjust the document resolution to suit your fax needs (see ?$paratext>? on page 7.4). If you need to change the darkness, see ?$paratext>? on page 7.2. 3 Press On Hook Dial. You hear a dial tone. 4 Enter the receiving fax machine’s number using the number keypad. You can also press and hold the digit button of the speed dial number if you have assigned one. To store the speed dial number, see ?$paratext>? on page 7.8. 5 Press Start when you hear a high-pitched fax signal from the remote fax machine. NOTE: When you want to cancel a fax job, press Stop/Clear at any time while sending. Redialing the Last Number To redial the number you last called: Press Redial/Pause. When a document is loaded in the ADF (Automatic Document Feeder; see ?$paratext>? on page 7.3), the machine automatically begins to send. For a document placed on the document glass, the display asks if you want to load another page. Select “1:Yes” to add. Otherwise, select “2:No”. Confirming Transmission When the last page of your document has been sent successfully, the machine beeps and returns to Standby mode. When something goes wrong while sending your fax, an error message appears on the display. For a list of error messages and their meanings, see ?$paratext>? on page 9.4. If you receive an error message, press Stop/Clear to clear the message and try to send the document again. You can set your machine to print a confirmation report automatically each time sending a fax is completed. For further details, see the MSG Confirm item on ?$paratext>? on page 7.2. Automatic Redialing When the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number every three minutes, up to seven times according to the factory default settings. When the display shows “Retry Redial ?”, press Enter to redial the number without waiting. To cancel the automatic redialing, press Stop/Clear. To change the time interval betw...
Эта инструкция также подходит к моделям:Принтеры - SCX-4321 (5.23 mb)
Принтеры - SCX-4521F (5.23 mb)
Принтеры - SCX-4521FG (5.23 mb)
Принтеры - SCX-4521FL (5.23 mb)