Инструкция по эксплуатации Samsung, модель SCX-4500C
Производитель: Samsung
Размер: 5.21 mb
Название файла:
Язык инструкции:
|
 
|
|
|
Перейти к скачиванию
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note • Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. • Before purchasing large quantities of print media, ensure that it meets the requirements specified in this user’s guide. Caution Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Samsung’s warranty or service agreements. Guidelines for selecting and storing print media When selecting or loading paper, or other print materials, keep these guidelines in mind: • Always use print media that conform with the specifications listed on page 4.3. • Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality. • For the best print quality, use only high quality copier grade paper specifically recommended for use in laser machines. • Avoid using the following media types: - Paper with embossed lettering, perforations, or a texture that is too smooth or too rough - Erasable bond paper - Multi-paged paper - Synthetic paper and thermally reactive paper - Carbonless paper and Tracing paper. Use of these types of paper could result in paper jams, chemical smells, and damage to your machine. • Store print media in its ream wrapper until you are ready to use it. Place cartons on pallets or shelves, not on the floor. Do not place heavy objects on top of the paper, whether it is packaged or unpackaged. Keep it away from moisture or other conditions that can cause it to wrinkle or curl. • Store unused print media at temperatures between 15 °C and 30 °C. The relative humidity should be between 10% and 70%. • Store unused print media in a moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating your paper. • Load special media types one sheet at a time through the tray to avoid paper jams. • To prevent print media, such as transparencies and label sheets, from sticking together, remove them as they print out. 4.2 Specifications on print media Due to the nature of the product, the envelope type of media cannot be used with your machine. Note • •Use the print media type mentioned below only. Type Size Dimensions Weighta Capacityb Plain paper Letter 216 x 279 mm (8.5 x 11 inches) 60 to 120 g/m2 (16 to 32 lb bond) for the tray 100 sheets of 75 g/m2 (20 lb bond) paper for the tray A4 210 x 297 mm (8.26 x 11.69 inches) JIS B5 182 x 257 mm (7.16 x 10.11 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) A5 148 x 210 mm (5.82 x 8.26 inches) A6 105 x 148 mm (4.13 x 5.82 inches) Executive 184 x 267 mm (7.25 x 10.5 inches) Transparencyc Letter, A4 Refer to the Plain paper section 138 to 146 g/m2 (37 to 39 lb bond) 1 sheet for the tray Labels Letter, A4 Refer to the Plain paper section 120 to 150 g/m2 (32 to 40 lb bond) 1 sheet for the tray Card stock Letter, A4 Refer to the Plain paper section 60 to 120 g/m2 (16 to 32 lb bond) 1 sheet for the tray Minimum size (custom) 105 x 148 mm (4.13 x 5.83 inches) 60 to 120 g/m2 (16 to 32 lb bond) for the tray Maximum size (custom) 216 x 297 mm (8.5 x 11.69 inches) a. If media weight is over 105 g/m2 (28lb bond), load a paper into the tray one by one. b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. c. Recommended media: Transparency for a Laser Printers produced by HP, Xerox and 3M. It is not recommended to use paperbacked transparencies such as Xerox 3R91334, which can cause a jam or be scratched. Note •When you use the thick paper (90 to 120 g/m2, 24 to 32 lb bond), select Thick Paper in the paper type. See 4.6 page. • When you use the thin paper (under 70 g/m2, under 19 lb bond), select Thin Paper in the paper type. See 4.6 page. • When you use the recycled paper, select Recycled Paper in the paper type. See 4.6 page. Media sizes supported in each mode Mode Size Source Copy mode Letter, A4, Executive, JIS B5, A5, A6 tray Single side printing Letter, A4, Executive, JIS B5, ISO B5, A5, A6, custom 4.3 Guidelines for special print media Media type Guidelines Transparencies • To avoid damaging the machine, use only transparencies designed for use in laser machines. • Transparencies used in the machine must be able to withstand the machine’s fusing temperature. Check your machine’s specification to view the fusing temperature, see page 11.1. • Place them on a flat surface after removing them from the machine. • Do not leave them in the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. Ca...
Эта инструкция также подходит к моделям:
Принтеры - SCX-4500 (5.21 mb)
Принтеры - SCX-4501K (5.21 mb)
Принтеры - SCX-4501KG (5.21 mb)
Принтеры - Mono Multifunction Printer SCX-4500 Series (5.21 mb)
)