Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The display shows: If you want to restore the current time, press the key, the key and take the following step. -Overwrite with the new number and confirm the setting by pressing the key or press the key, type the new number and confirm the setting by pressing the key or confirm the existing one by pressing the key straight away. The display shows: ! The fax machine's memory allows you tosend a document (even at a preset time: "Delayed transmission") to several correspond- If there is a power failure, the broadcast transmission ents (max. 10): "Broadcast transmission". See "To send a docu will be cancelled. ment from the memory ". TO SEND A DOCUMENT FROM THE MEMORY Place the document in the ADF. The display shows on the top line: and on the bottom line, the default contrast value: NOR- MAL. The initial resolution value is: " " (standard). If you want, change the contrast and resolution values as described previously. Until the display shows: The fax machine starts to save the document. Once saved, the display shows the message "DOC.N. XXXX" and then: -Enter the time at which you want to send the document , for exemple "16:50", then press the key or press the key straight away to confirm the current time. The display shows: -Dial your correspondent’s number in any of the available methods: directly on the numeric keypad or using the one- touch keys ( -) or speed dialling codes (see "To set one-touch and speed dialling"). The fax machine prompt you to enter another number: If you want to send the document to more than one corre- spondent, repeat the previous two steps the necessary number of times and then press the key to terminate the procedure. If you want to send the document to one correspondent only, press the key without entering any numbers. Once the procedure has been completed, the display shows: TO SEND A DOCUMENT FROM THE MEMORY Place the document in the ADF. The display shows on the top line: and on the bottom line, the default contrast value: NOR- MAL. The initial resolution value is: " " (standard). If you want, change the contrast and resolution values as described previously. Until the display shows: The fax machine starts to save the document. Once saved, the display shows the message "DOC.N. XXXX" and then: -Enter the time at which you want to send the document , for exemple "16:50", then press the key or press the key straight away to confirm the current time. The display shows: -Dial your correspondent’s number in any of the available methods: directly on the numeric keypad or using the one- touch keys ( -) or speed dialling codes (see "To set one-touch and speed dialling"). The fax machine prompt you to enter another number: If you want to send the document to more than one corre- spondent, repeat the previous two steps the necessary number of times and then press the key to terminate the procedure. If you want to send the document to one correspondent only, press the key without entering any numbers. Once the procedure has been completed, the display shows: If there is a power failure, the transmission from the memory will be cancelled. TO CHANGE/REPEAT/DELETE A TRANSMISSION FROM THE MEMORY THAT IS ALREADY SET Until the display shows: The display shows: The display shows: /To view the other available options: "CHANGE PARAM.?" or "CANCEL SETTING?". To confirm your choice. PRINT SETTING? – To print the memory transmission parameters only. When it has finished printing, the fax ma- chine returns automatically to its initial status. CANCEL SETTING? – To clear the setting. The fax ma- chine returns to its initial standby status. CHANGE PARAM.? – To change the correspondent’s number or the time at which you want to send the document. The display shows: From this point on, proceed as indicated in the last three steps of the procedure in "To send a document from the memory". TO RECEIVE A DOCUMENT You can set up the fax machine to receive the documents sent by your correspondents in four separate modes: • Manual reception, for all occasions in which you are present and you can therefore answer the calls yourself. • Automatic reception, for all occasions in which you are out but want to receive documents anyway. This is the mode originally set on your fax machine. • Automatic reception with recognition of the type of call. In this reception mode, after a given number of rings (default setting: 2 rings), the fax machine connects to the telephone line and is capable of recognizing whether the incoming call is a fax call or a telephone call. • Reception with telephone answering device. In this reception mode, the TAD receives the calls, records any messages left by the correspondent and, if he wants to send you a document, enables the fax machine to receive it. TO CHOOSE THE RECEPTION MODE Until the display shows: The display shows: /To view the other available options: "MANUAL", "PHONE/ FAX" and "TAD/FAX". To confirm the setting. To...
Эта инструкция также подходит к моделям:Принтеры - 450 (2.03 mb)