Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
For details about output tray refer to the illustration in . P.36 “Output: Copier” . ....Prepare Stapling Perform a test staple after replacing staples or removing jammed staples. Note . Press [OK] to prepare stapling. 37 AdonisC2-sysEN122F_FM.book Page 38 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Output tray settings Limitation . You cannot interrupt a job when 1000–sheet Finisher is stapling jobs using paper larger than 81/2".14". However, jobs received by fax will be printed and delivered to Internal tray 1. . If the staple function is selected when using 2 Tray Finisher, the job will be delivered to Finisher shift tray 2 regardless of the setting. . When Print post is installed, even if the output tray selected is an internal tray, paper longer than 81/2".14" size is delivered automatically to the following output trays. 3 Installed option More than 81/2 ".14" paper Mailbox proof tray Mailbox output tray 2 Tray Finisher+Mailbox proof tray Mailbox output tray Finisher shift tray1 If Mailbox proof tray is installed on your machine and you often use paper larger than 81/2". 14", specify an output tray other than internal tray. Paper Size Settings 1/3 . ....Paper Tray Priority (Copy/Document Server) You can specify the output tray for delivery. Note . Default: Internal tray 1 . ....Paper Tray Priority (Fax/Printer) You can specify the output tray for delivery. Note . Default: Internal tray 1 . ....Tray Paper Size: (Tray 1–4) Select the size of the copy paper set in the paper tray. Reference Copy Reference "Changing the Paper Size". Important . If the specified paper size differs from the size of paper actually set in the paper tray, a paper misfeed might occur because the paper size is not detected correctly. 38 AdonisC2-sysEN122F_FM.book Page 39 Thursday, February 1, 2001 1:46 PM Settings You Can Change with the User Tools Note . The tray fence for the optional large capacity tray (LCT) is fixed. If you need to change the paper size, contact your service representative. . If the paper size set for the dial in paper tray 1 and 2 is different to the paper size for this setting, the paper size of the dial has priority. . If you load paper in tray 1 or 2 that is not available on the paper size dial, set the dial to "*". . The paper sizes you can set for (Tray1–4) are as follows: • A3L, B4L, A4K, A4L, B5K, B5L, A5L • 11".17"L, 81/2".14"L, 81/2".11"K, 81/2".11"L, 8".13"L, 81/2".13"L, 81/4".13"L, 81/4".14"L, 11".14"L, 71/4". 101/2"L, 8".101/2"K, 8".101/2"L, 51/2".81/2"L . Default: • Internal tray 1: 81/2".11"K • Internal tray 2: 11".17"L • Internal tray 3: 81/2".11"L • Internal tray 4: 81/2".14"L 3 Paper Size Settings 2/3 . ....Paper Type (Bypass Tray) Sets the display so you can see what type of paper is loaded in the bypass tray. Note . Default: No display . ....Paper Type (Tray1–4) Sets the display so you can see what type of paper is loaded in each of the paper trays. This information is used by the print function to automatically select the paper tray. Note . Default: • Paper Type: No display • Copying Method: 2 Sided Copy • Apply Auto Paper Select: Yes . A key mark is displayed next to the paper tray if No is selected. Limitation . Auto paper select can only be selected for the Copy function if No display and Recycled paper are selected. However, auto paper select is not used if No is selected. 39 AdonisC2-sysEN122F_FM.book Page 40 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Paper Size Settings 3/3 3 . ....Paper Type (LCT) Sets the display so you can see what type of paper is loaded in the large capacity tray. Note . Default • Paper Type: No display • Copying Method in Duplex: 2 Sided Copy • Apply Auto Paper Select: Yes . A key mark is displayed next to the paper tray if No is selected. Limitation . Auto paper select is only selected for the Copy function if No display and Recycled paper are selected. However, auto paper select is not used if No is selected. . ....Cover Sheet Tray (Copy/Document Server) Note . Default: • Tray to program: NONE . The functions that use the Cover Sheet Tray setting are the front cover function and both covers function. . When Mode Selected is selected, the cover settings options are only displayed when the cover function or slip sheet function is selected. . You can only set the Copying Method in Duplex setting when At Mode selected is selected. . ....Slip Sheet Tray (Copy/Document Server) Note . Default: • Tray to program: NONE . When you use the Slip Sheet function, you can use the output tray specified in the Slip Sheet Tray setting. . When At Mode selected is selected, the options are only displayed when the cover function or slip sheet function is selected. Reference Copy Reference "Cover/Slip Sheet" 40 AdonisC2-sysEN122F_FM.book Page 41 Thursday, February 1, 2001 1:46 PM Settings You Can Change with the User Tools Timer Setting When entering Set Time mode, if a key operator code has already been set, you must enter the code (up t...
Эта инструкция также подходит к моделям:Принтеры - 2335 (2 mb)
Принтеры - 4502P (2 mb)
Принтеры - 3502P (2 mb)
Принтеры - 2545 (2 mb)