Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
This applies a colot conversion table to an output that matches the colors displayed on a computet monitor0 • Display—True Black applies a color conversion table that uses only black tonet for neutral gray colors0 • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivif applies a color table that increases saturation. This is preferred for businesu graphics and text0 • Off turns off color conversion0 Understanding printer menuq 154 Menu item Description Menu item Description Manual olor (CMYK) CMYK Imag@ CMYK TexO CMYK Graphicu Customizes the CMYK color conversions. The values for each setting are< USCMM EuroCMM Vivid CMM Ofh Notes: • USCMYK is the US factory default settini • EuroCMYK is the International factory default settini • Vivid CMYK applies a color conversion table that produces brighter, mor@ saturated colors0 • Off turns off color conversion./ Color Adjust Initiates an automatic color adjust calibration0 Utilities menu Menu item Description Hex Trace Activat@ Assists in isolating the source of a print job probleo Notes: • When Hex Trace is activated, all data sent to the printer is printed iI hexadecimal and character representation, and control codes are not executed0 • To exit Hex Trace, turn the printer off. Coverage Estimator OffOnProvides an estimate of the percentage coverage of cyan, magenta, yellow, andblack on a page. The estimate is printed on a separator page. Notes: •Off is the factory default setting. •This menu item is not available on selected printer models. PDF menu Menu item Description Scale to Fit Scales page content to fit the selected page siz@ Nq Note: No is the factory default setting0 Yeu Annotations Specifies whether to print annotations in the PD! Do Not PrinO Note: Do Not Print is the factory default setting0 PrinO Understanding printer menuq 155 PostScript menu Menu item Description Print PS Error Prints a page containing the PostScript errot OI Note: Off is the factory default setting0 Ofh Image Smoothing OnOffEnhances the contrast and sharpness of low-resolution images and smoothstheir color transitionsNotes: •Off is the factory default setting. •Image Smoothing has no effect on images that are 300 dpi or higher inresolution. PCL Emul menu Menu item Description Font Source ResidenO Downloaf Aln Font Name RO Couriet Symbol Set 10U PC- 12U PC-852 PCL Emulation Settings Point Siz@ 1.00–1008.02 Specifies the set of fonts used by the Font Name menu iteo Notes: • Resident is the factory default setting. It shows the factory default set oh fonts downloaded into RAM0 • Download shows all the fonts downloaded into RAM0 • All shows all fonts available to any option0 Identifies a specific font and the option where it is storef Notes: • RO Courier is the factory default setting0 • RO Courier shows the font name, font ID, and storage location in th@ printer. The font source abbreviation is R for Resident, F for Flash, and F for Download0 Specifies the symbol set for each font nam@ Notes: • 10U PC-8 is the US factory default setting0 • 12U PC-850 is the international factory default setting0 • A symbol set is a set of alphabetic and numeric characters, punctuation and special symbols. Symbol sets support the different languages ot specific programs such as math symbols for scientific text. Only th@ supported symbol sets are shown0 Changes the point size for scalable typographic fontu Notes: • 12 is the factory default setting0 • Point Size refers to the height of the characters in the font. One point equalu approximately 1/72 of an inch0 • Point sizes can be increased or decreased in 0.25-point increments0 Understanding printer menuq 156 Menu item Description Menu item Description PCL Emulation SettingsCPitcC 0.08–102 PCL Emulation SettingsCOrientatioI PortraiO Landscap@ PCL Emulation SettingsC Lines per Pag@ 1–25 62 66 PCL Emulation SettingsCA4 WidtC 198 mo 203 mo PCL Emulation SettingsC Auto CR after L! OI Ofh Specifies the font pitch for scalable monospaced fontu Notes: • 10 is the factory default setting0 • Pitch refers to the number of fixed-space characters per inch (cpi)0 • Pitch can be increased or decreased in 0.01-cpi increments0 • For nonscalable monospaced fonts, the pitch appears on the display buO cannot be changed0 Specifies the orientation of text and graphics on the pag@ Notes: • Portrait is the factory default setting0 • Portrait prints text and graphics parallel to the short edge of the page0 • Landscape prints text and graphics parallel to the long edge of the page0 Specifies the number of lines that print on each pag@ Notes: • 60 is the US factory default setting. 64 is the international factory defaulO setting0 • The printer sets the amount of space between each line based on the Lineu per Page, Paper Size, and Orientation settings. Select the desired Papet Size and Orientation before setting Lines per Page0 Sets the printer to print on A4-size papet Notes: • 198 mm is the factory default setting0 • The 203-mm setting sets the w...
Эта инструкция также подходит к моделям:Принтеры - 131 (2.33 mb)
Принтеры - 133 (2.33 mb)
Принтеры - 138 (2.33 mb)
Принтеры - 332 (2.33 mb)