Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Click Preview to view the current image. Step 2. Scan, Copy, or pick a Creative Task. mr Preview section See a preview of the image, and select an area to be scanned. 9 If you are sending the scanned image to a software program, click Scan Now to complete the scan. If you are using the Creative Tasks section, follow the instructions on the computer screen. For a list of the Creative Tasks available from the All-In-One Main Page, see page 6. English Copying Note: You can make a color or black-and-white copy. Press Color Copy or Black Copy on the control panel. To make black-and-white, gray, or color copies: 1 Open the top cover of the All-In-One. 2 Place the item you want to copy facedown on the glass. Make sure the upper left corner of the front of the item aligns with the arrow. 3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 5). The All-In-One Main Page appears. 5 Click See More Copy Settings to review and change the copy settings. The All-In-One Copy section expands: Preview Now button Click to see a preview of the image Copy Now button Click to copy your image. Copy settings the settings for the copy. Preview section See a preview of the image, and select an area to be copied. 6 Select your copy settings. Note: You may want to reduce or enlarge the image. 7 Click Copy Now. Faxing The following steps tell you how to send a fax using the computer modem. 1 Open the top cover. 2 Place the item you want to fax facedown on the glass. Make sure the upper left corner of the front of the item aligns with the arrow. 3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 5). 5 From the Creative Tasks section of the All-In-One Main Page, click Fax an image. 6 Follow the instructions on the computer screen. 12 Creating fun projects To create these and other fun projects: 1 Open the Lexmark Solution Center (see page 8). 2 Click How To. 3 Select a project. 4 Follow the instructions on the computer screen. Replacing print cartridges The Lexmark 1200 Series uses the following cartridges: Item: Part number Black cartridge 10N0016 16 17 Color cartridge 10N0026 26 27 Note: For information about ordering supplies, see the Maintenance tab on page 8. 1 Make sure the All-In-One is on. 2 Lift the scanner unit until the scanner support keeps it open. The print cartridge carrier moves and stops at the loading position unless the All-In-One is busy. 3 Grasp the tabs on the cartridge lids, and then lift the lids. 4 Remove the old cartridges. Store them in an air-tight container or dispose of them. 5 If you are installing new cartridges, remove the stickers and transparent tape from the bottom of the cartridges. Warning: Do not touch the gold contact area on the cartridges. 6 Insert the new cartridges. Make sure the black print cartridge is secure in the right carrier and the color cartridge is secure in the left carrier, and then snap the lids closed. 7 Lift the scanner unit and push the scanner support back while lowering the scanner unit until it is completely closed. Lexmark’s All-In-One warranty does not cover repair of failures or damage caused by a refilled cartridge. We do not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the All-In-One. For best results, use Lexmark supplies. 13 English Troubleshooting This section helps you solve problems you may have with the All-In-One. Additional troubleshooting information is available in the Lexmark Solution Center. For help accessing the Lexmark Solution Center, see page 8. Troubleshooting checklist Before you try to solve the problem, check the following: „ Is the power cord firmly attached to the All-In-One and a known ll! working electrical outlet? |~7| Are both the computer and All-In-One turned on? 0 0 0 0 0 Is the USB cable securely attached to the computer and the All-In-One? Did you remove the sticker and transparent tape from both print cartridges? For help, refer to the setup documentation. Is the black print cartridge secure in the right carrier and the color cartridge secure in the left carrier? Is the paper loaded correctly? Make sure you do not force the paper into the printer. Did you install the printer software correctly? For help, refer to the setup documentation. Is the Lexmark 1200 Series set as the default printer? To check, 0 click Start ► Settings ► Printers. If the Lexmark 1200 Series is not set as the default printer, you need to remove and then reinstall the software. For help, see page 16. 1 Setup troubleshooting Problem: Go to page: Power light does not come on 14 Alignment page does not print 14 When I insert the All-In-One software CD, nothing happens 15 All-In-One is not communicating with the computer 15 Installation appears incomplete 15 All-In-One prints slowly 15 Print is too dark or smudged 15 Vertical lines are jagged or edges are not smooth 15 White lines appe...
Эта инструкция также подходит к моделям:Принтеры - 1200 Series (788.56 kb)