Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
This product contains no known hazardous materials as defined by the OSHA Hazard Communication Standard 29 CFR 1910.1200. Section 4: First Aid Measures Inhalation: Skin Contact: Remove to fresh air if effects occur. Gargle with water. Get medical attention if needed. Wash with soap and water. Eye Contact: Ingestion: In case of contact, immediately flush eyes with water for 15 minutes. Get medical attention if needed. Dilute stomach contents with several glasses of water. Get medical attention if needed. Section 5: Fire Fighting Measures Suitable extinguishing media: CO2, dry chemical, foam or water. Unusual Fire and Explosion Hazards: Toner material, like most Extinguishing media which may not be used for safety reasons: none organic material in powdered form, is capable of creating a dust explosion. Flammability: Product will burn in case of fire. The decomposition products are CO, CO2, and Nox. Avoid inhalation of smoke. Special protective equipment for fire fighters: none UEL: n/a LEL: n/a Section 6: Accidental Release Measures MATERIAL SAFETY DATA SHEET Page 2 of CP-332 Spill / leak Procedures: If spilled, sweep up using an approved toner vacuum with a 0.5 micron filter or smaller, such as the Atrix AAA Toner Vacuum or 3M Toner Vacuum. Use of a vacuum cleaner not rated for toner particles, could result in a fire or personal injury. Remove residue with soap and cold water. Miscellaneous: Keep product out of sewers and watercourses. Personal protection: Avoid inhalation of dust. Special Handling: Special Storage: Miscellaneous: Section 7: Handling and Storage Cleanse skin after contact before breaks or meals, and end of workday. Store in a cool, dry place. Avoid direct sunlight. Keep out of reach of children. Keep from contact with oxidizing materials. Do not handle in windy areas. Flying powder may enter eyes. Minimize inhalation of dust. Cleanse skin thoroughly after contact, before breaks and meals, and at end of work periods. Section 8: Exposure Control and Personal Protection Information: Respiratory Protection: none required under normal use. Hand Protection: none required under normal use. Eye Protection: none required under normal use. Ventilation: Local exhaust equipment is needed. Skin Protection: none required under normal use. Exposure Guidelines: USA OSHA (TWA/PEL) : 15mg/m3 (Total Dust); 5mg/m3 (Respirable fraction) ACGIH (TWA/TLV) : 10mg/m3 (Total dust); 3mg/m3 (Respirable fraction) DFG (MAK) : 6mg/m3 (Total dust) Section 9: Physical and Chemical Properties CHARACTERISTICS: Appearance: Black Melting point: 110 – 150?C (softening point) Form: Powder Vapor pressure: n/a Odor: Odorless Vapor density: n/a Solubility in Water: Negligible Evaporation rate: n/a Density: 1.1 – 1.5 Boiling point: n/a Flammability: N/a Fat solubility: N/a Section 10: Stability and Reactivity Conditions to avoid: none Materials to avoid: none Stability: Stable Hazardous decomposition products: CO and CO2 and other decomposition products when burned. Section...
Эта инструкция также подходит к моделям:Принтеры - 480-0021 (16.47 kb)
Принтеры - 5355 (16.47 kb)
Принтеры - 5480 (16.47 kb)
Принтеры - 5565 (16.47 kb)