Войти:
Оценок - 2, средний балл: 5 ( )

Инструкция по эксплуатации Citizen, модель SRP-F310/312

Производитель: Citizen
Размер: 3.96 mb
Название файла: SRP-F310_SVC_Rev_1_00.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


270mm (63.82 Lines/sec, 1/6inch feed) • 2color Max. 130mm (30.73 Lines/sec, 1/6inch feed) • Ladder Barcode: Mono 270mm/sec, 2Color 130mm/sec Paper feeding Speed • Approx. 270mm/sec Table 3-2 Thermal Printer Specification 2) 203 dpi Item Description Remark Model • SRP-F312 (TPH: KRC-80-8TA02-BIX2,KYOCERA CORPORATION) Print Method • Thermal Line Printing Dot Density • 0.125mm(8 Dots/mm) Printing Direction • Uni-direction with friction feed Printing Width •80.0mm, 640 dot Position Character / Line • 48 (Font A: 12x24) • 64 (Font B: 9x17 ) Character Spacing • 0.25mm (0.01) (2 dots) (Font A) • 0.25mm (0.01) (2 dots) (Font B) Printing Speed • Mono Max. 270mm (72 Lines/sec, 1/7inch feed) • 2color Max. 130mm (34.6 Lines/sec, 1/7inch feed) • Ladder Barcode: Mono 270mm/sec, 2Color 130mm/sec Paper feeding Speed • Approx. 270mm/sec Table 3-3 Thermal Printer Specification 3-3-2 Character Specification Item Description Remark • Alphanumeric Characters: 95 Number of Character • Extended Characters: 128 x 34 Page (Including one space page) • International Characters: 32 Character Structure • 12 x 24 (Font A) (Including 2-dot spacing in horizontal) • 9 x 17 (Font B) (Including 2-dot spacing in horizontal) Font A is selected as the default Table 3-4 Thermal Printer Character Specification Rev. 1.00 - 18 SRP-F310/312 3-3-3 Paper Specification Item Description Remark Paper Type • Mono:TF50KS-E(Nippon paper) • 2Color: PB-70(Mitsubishi) Paper Form • Paper Roll Paper Width • 80mm / 83mm Paper Roll Size • Max 105mm(3.26”) Spool Inside Dia. • 12mm (0.47) Spool Outside Dia. • 18mm (0.71) Table 3-5 Thermal Printer Paper Specification . Note * Mono: The Following paper can be used instead of the specified paper above. TF50KS-E(Paper thickness: 65.m): Nippon Paper industries Co., Ltd. PD 160R ( “ : 75.m): New Oji Paper Mfg, Co., Ltd. P350 ( “ : 62.m): Kansaki Specialty Paper, Inc. (USA) * 2Color: PB-670 ( “ : 75.m): Mitsubishi PD750R ( “ : 75.m): Oji paper Mfg. Co.,Ltd. 3-3-4 Reliability and Environment Specification Item Description Remark Life • Mechanism: Monochrome: 20,000,000 Lines 2Color : 10,000,000 Lines The reliability values above are assumed When a 15-Line feed and a 10-Line print repeat alternately • Head: 1x108 Pulses, Monochrome: 150Km, 2Color: 75Km • Auto Cutter: 1,800,000 Cut, MCBF • Monochrome:70,000,000Lines, 2Color:35,000,000Lines Environmental Temperature • Operating: 0°C ~ +45°C • Storage: -20°C ~ +60°C (Except for Paper) Humidity • Operating: 10% ~ 80% RH(non-condensing) • Storage: 10% ~ 90% RH(non-condensing) Table 3-6 Thermal Printer Reliability Specification Rev. 1.00 - 19 SRP-F310/312 3-3-5 Printable Area a d c e Figure 3-4 Printable Area b 1) 180dpi Item Description Remark a 80±0.5mm(3.15 ±0.0197) b 0.141 (0.0056 ) c 72.2±0.2mm(2.83 ±0.0079) d 2.75mm~4.25mm e 2.75mm~4.25mm Dots 512 Font 9X17 56 Character Font 12X24 42 Character * ‘d’ & ‘e’ position can be shifted while printing according to the paper position. 2) 203dpi Item Description Remark A 80±0.5mm(3.15 ±0.0197) B 0.125 (0.0049 ) C 80mm±0.2mm (2.83±0.0079) D 2.75mm~4.25mm E 2.75mm~4.25mm Dots 640 Font 9X17 64 Character Font 12X24 48 Character * ‘d’ & ‘e’ position can be shifted while printing according to the paper position. 3-3-6 TPH (Thermal Printer Head) Specification 1) 180dpi Item Description Remark Heat Element Structure 2 Heaters / Dot Number of Heat Element 512 Dots Heat Element Pitch 0.141mm/dot, 7Dot/mm (180DPI) Print Width 72.2±0.2mm Average Resistance 800. ± 3% Thermister 1) Resistance R25: 30k. ± 5% (At 25.) 2) B Value: 3950K ± 2% 3) Temperature: - 40. ~ +80. Table 3-7 TPH Specification Rev. 1.00 - 20 SRP-F310/312 Item Maximum Unit Conditions Print Cycle (S.L.T.) 0.46 ms/Line T=25. Supply Energy 0.20 mJ/Dot Supply Voltage 24 V Voltage among the connector terminals Substrate Temperature 70 . Temperature detected by Thermistor Number of heating dots at same time 256 Dots Logic Supply Voltage (VDD) 3.3 V Logic Supply Current (IDD) 204 mA ALL-HIGH Table 3-8 TPH Maximum Condition (At 25.) 2) 203dpi Item Description Remark Heat Element Structure 2 Heaters / Dot Number of Heat Element 640 Dots Heat Element Pitch 0.125mm/dot, 8Dot/mm (203DPI) Print Width 80±0.2mm Average Resistance 800. ± 3% Thermister 1) Resistance R25: 30k. ± 5% (At 25.) 2) B Value: 3950K ± 2% 3) Temperature: - 40. ~ +80. Table 3-9 TPH Specification Item Maximum Unit Conditions Print Cycle (S.L.T.) 0.42 ml/Line T=25. Supply Energy 0.09 mJ/Dot Supply Voltage 24 V Voltage among the connector terminals Substrate Temperature 70 . Temperature detected by Thermistor Number of heating dots at same time 320 Dots Logic Supply Voltage (VDD) 3.3 V Logic Supply Current (IDD) 255 mA ALL-HIGH Table 3-10 TPH Maximum Condition (At 25.) 3-3-7 Other Component Specification Item Description Remark Auto Cutter • Model: ORC-RWB80 (OHYANE RIKI MFG, Co., Ltd) • Type: Guillotine Type • Motor: DC Brush Motor FK-180SH-12280 (Mabuchi Motor) • Voltage: 24V DC ± 5%(Motor), 5V DC ± 5%(Switch) • Current: 200mA...

Эта инструкция также подходит к моделям:
Принтеры - SRP-F310/312 (3.96 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории