Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Punching Handle (PB 300/400 only) 2. Binding Handle 3. Sheet Supporter/Adjustable Comb Guide Selector 4. Adjustable Margin Guide 5. Punching Area 6. Binding Area (Metal Rakes) 7. Waste Paper Drawer 8. Left Side Cover 9. Right Side Cover 10. Disengagable Punching Dies (PB 400/500 only) 11. Margin Depth Setter (PB 400/500 only) 12. Binding Lock Dial (PB 400/500 only) 13. On/Off Switch (PB 500 only) 14. Punching Switch (PB 500 only) PB 300 & PB 400 3 5 1 9 6 7 4 28 10 11 12 Assembly To Assemble your PB 300/400 Binding Machine 1. There are two (2) handles supplied with the machine. Attach the longer (Punching Handle) to the right side of the machine by firmly pressing square hole of handle onto square shaft. To operate correctly, the handle should be positioned as illustrated. NOTE: If the handle is not positioned as illustrated it will not punch. Once the handle is fully attached, secure it by inserting the screw supplied. 2. Carefully attach the Right Side Cover over the Punching Handle. 3. Attach the shorter, handle (Binding Handle) to the left-side of the machine by firmly pressing square hole of handle onto square shaft, position as illustrated. NOTE: If the handle is not positioned as illustrated, it will not bind properly. Secure the handle by inserting the screw supplied. 4. Carefully attach the Left Side Cover over the Binding Handle. 5. To mount the Sheet Supporter/Adjustable Comb Guide Selector, first be sure the two (2) phillips screws are loose enough so the Supporter/Selector slides easily into place. Mount Supporter/Selector and secure by tightening screws. To Assemble your PB 500 Binding Machine Follow steps 3-5 for PB 300/400 assembly instructions. PB 500 7 8 11 4 2 14 3 5 10 13 9 6 12 Using the Binding Machine Adjustable Depth Setter (PB 400/500 only) The margin you want for your document depends on its contents and ultimate thickness. The PB 400/500 makes selecting margin depth easy with its unique margin depth setter. To use: 1. After choosing the appropriate comb diameter size, adjust the margin depth setting to correspond. NOTE: The number on the margin dial should correspond to the arrow on the cover. 2. Setting Guide: Position 1: 1/8" to 1/2" (3.2 to 12.7 mm) Position 2: 5/8" to 3/4" (15.9 to 19.1 mm) Position 3: 1" to 2" (25.4 to 50.8 mm) Punching Holes (PB 400/500 only) A unique feature of the Fellowes Binding Machine allows you to punch various size documents by using the disengagable punching dies. Document Size # of Holes Letter/Oversized Covers 19 holes A4 21 holes Legal 24 holes 1. Set the machine to document size using the above chart. Disengage, or pull up metal pins for unwanted holes. It is recommended that you disengage from the right side of the machine allowing you to use the ruler by the margin guide. 2. Holes should always be centeredbetween the top and bottom of paper edge. To center hole, set the adjustable margin guide for oversized covers (8-3/4”x11-1/4” • 222mm x 285mm), letter size documents (8-1/2”x11” •...
Эта инструкция также подходит к моделям:Принтеры - PB 500 (80.56 kb)
Принтеры - PB 400 (80.56 kb)