Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
WZ-AESAD RAMSA и Dual AES Outpul Card WZ-AESAD 0{ 1© AES/EBS DIGITAL OUTPUT - «1 Before attempting to oonnect or ooerato this product, please read these instructions carefully and save this manual for future use Introduction The WZ-AESAD is an option card to be installed in the AD Converter WZ-AD 96 and WZ-AD96M. This card supplies an 8-channel, 24 bit, 96 kHz signal to the connected MTRs. Warning! The installation shown below should be made by qualified service personnel or system installers. Installation 1. Plug off the power cord of the converter from an AC outlet. 2. Losen four screws as illustrated, then remove the standard AES/EBU output block from the rear panel of the AD Converter. 3. Place the option card into the opening, then push it to the end. 4. Fasten the four screws to fix the option card. Pin Assignment AES 8 Hot ’5ÑIT AES /'fcoid AES 6 Hoi gn: AES 8 Cold AES 7 Hot GND AES 6 Cold Agf 5Wd~ ffilS5 H0t AES 4 Cold AES 3 Hot GND AES 2 Cold AES 1 Hot GND AES i Hot ^ND~ AES 3 Cold AES 2 Hfl GND _ .Si Cold Not used Recommended Cable Panasonic part # DA/DB-XLRM (DB-25 to 8 Male XLR, Length 3m), AD Output cable is recomended. Specifications Output Connector Format Signal Level Channel Mode Dimensions Weight DB25 AiiS/EBU (24 bit AES3-1992) RS-422 8 ch, 24-bit, 44.1/48 kHz, Normal AES 8 ch, 24-bit, 88.2/96 kHz, Hi-Specd AES 8 ch. 24-bit. 88.2/96 kHz, Dual AES 108(W)x37(H)x62(D) mm 4-l/4(W) X 1-7/16(H) X 2-7/l6(D) inch 230 g (0.51 lbs) Panasonic Broadcast & Television Systems Company Professional Audio Division 3330 Cahuenga Boulevard. Los Angeles, CA 90068 Telephone (323) 436-3500 avM1299-0 YWA8QA5357A N Printed in Japan © Matsushita Communication Industrial Co., Ltd. 1999...