Оценок - 4, средний балл: 3.5
(
)
)
|
Фото и характеристики Panasonic DP-1810F |
Фрагмент инструкции
. OOO – – – A A . Interrupt O . O OOO – – – . . . O: Possible Combined Functions. . : Unavailable Combined Functions. A : Next Selection is Carried Out. – : Indicates that SORT mode cannot be used. Non-sort operation is carried out. Function ¦ Using Function Modes to Change the Initial Copy Modes Printer Settings for Key Operator General Functions for Key Operator Copier Settings for Key Operator LAN Settings for Key Operator Input Identification Code Printer Settings General Functions Copier Settings LAN Settings Options #Press the FUNCTION Key $Press 1 (GENERAL FUNCTIONS) or 2 the (G or F) keys. COPY SIZE Key PAPER TRAY Key FUNCTION MODE (1-2) ENTER NO. OR .. ¦ Procedure FUNCTION Key RESET Key (COPIER SETTINGS) key.You may also use % Press the SET key. & Press the Keypad to select function modes or use the (G or F) keys. ( Follow the on screen instructions. ) After setting, press the SET key to set up the function. Checking the Copier’s Total Counter To display the copier’s Total Counter, press the COPY SIZE and PAPER TRAY keys simultaneously. NOTE CPlease refer to each option’s operating instructions for function settings. Making 27 Function General Functions No. Modes Function Initial Setting 00 SORT MODE DEFAULT Selects the sort mode. CNON-SORT, SORT NON-SORT 02 POWER ON DEFAULT Select mode.* CCopy, Fax Copy 05 SORT MEMORY USAGE Displays the amount of sort memory used on the panel. COFF, DISPLAY OFF 06 DEPT. COUNTER Copy usage and copy limit of the selected department and total copy usage will appear on the screen. Consult your service technician. 08 SORT-ROTATE DEFAULT Select Sort-Rotate mode. COFF, ON OFF 09 KEY OPERATOR MODE Input the key operator ID code. NOTE . Not available for plain copier, but will be available when installing options with advanced functions. (See page 51) Function Copier Settings No. Modes Initial SettingFunction 00 MARGIN DEFAULT Selects the margin position and shift value. CPOSITION (Left, Right, Top, Bottom) CVALUE (5 - 99 mm) LEFT 10 mm Selects the edge mode (Equal Rate = set the same value for X & Y or Individual = set the value for X & Y individually) and width. CEQUAL RATE (X & Y ), INDIVIDUAL C5 - 99 mm EDGE DEFAULT 05 Selects whether or not to disable edge deletion. CINVALID, VALID 2 in 1 WITH FRAME Selects the book Center Void margin width. C5- 99 mm BOOK MARGIN DEF. EQUAL RATE 5 mm 20 mm INVALID Enables or disables the use of skyshot mode. COFF, NORMAL, QUALITY DIGITAL SKYSHOT NORMAL OFF VALID Enables or disables the use of Manual Skyshot. COFF; M1 ON; M2 ON; M1, M2 ON MANUAL SKYSHOT Input key operator ID code. KEY OPERATOR MODE Automatically adjusts the copy density for text and photographic originals. CINVALID, VALID AUTO EXPOSURE 01 02 06 07 08 14 PORTRAIT L \ R Selects the orientation and layout for 2 in 1 Copy. CORIENTATION (Portrait, L-Scape) CLAYOUT (L \ R, R \ L) 2 in 1 DEFAULT 12 L \ RSelects the 2 page mode. CL \ R, R \ L 2 PAGE MODE DEF. 13 INVALID Select the reduction ratio in margin mode. CINVALID, VALID FRAME MARGIN03 Making NOTE CCertain Functions or Parameters are available for selection only when their respective option is installed. 29 Function General Functions for Key Operator Initial No. Modes Function Setting 00 PAPER SIZE Sets the paper size of each paper tray. Consult CTray-1, Tray-2, Tray-3, Tray-4 your service technician. Selects the Control Panel reset time. 01 AUTO RESET TIME 1 min. COFF, 30 sec, 1 min., 2 min., 3 min., 4 min. 02 ENERGY SAVER MODE Sets the Energy Saver mode and time. SLEEP CINVALID, ENERGY-SAVER, SLEEP Energy save mode timer : 1-120 minutes Sleep mode timer : 1-120 minutes 03 ENERGY SAVER TIME Sets the on time and off time for Energy Saver mode. CStart time - End time 04 LANGUAGE DEFAULT Selects the message language of the display. A-ENGLISH CA-ENGLISH, C-FRENCH, SPANISH 05 SPECIAL TRAY 1 Sets the paper tray for special paper (ex: colored). NONE CNONE, TRAY 1, TRAY 2, BYPASS 06 SPECIAL TRAY 2 Sets the paper tray for special paper. NONE CNONE, TRAY 1, TRAY 2, BYPASS 09 KEY/TOUCH BEEP Sets the panel touch sound. SOFT COFF, SOFT, LOUD 10 BYPASS SET BEEP Sets the sound when put paper(s) on bypass tray. INVALID C1: INVALID 2: VALID 11 ORIG. SET BEEP ADF Sets the sound when put paper(s) on ADF. VALID C1: INVALID 2: VALID 15 TOTAL COUNT Total print out volume from the main unit. 16 PC PRINT COUNT Total print out volume from the PC. 20 DATE & TIMESets the date & time. 21 DAYLIGHT TIME Sets daylight saving time. VALID CINVALID, VALID 25 COPY SETTING LIST Prints list containing Current Setting and Standard Setting. NOTE CIt is necessary to input the Key Operator ID code before changing items on this page. CThe Special Tray 1 and 2 are not auto-selectable in the switching mode. . Not available for plain copier, but will be available when installing options with advanced functions. (See page 51) Function No. Modes Initial SettingFunction Copier Settings for Key Operator ORIGINAL (HOME) Selects contrast for Text/Photo mode C1 ~ 5 T...