Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Press Home. 2. If necessary, press to select View and Print Photos, then press OK. 3. Press or as needed to change the settings below. Print Photos Option Settings Description View Photos -Scroll through the pictures on the memory card. Transfer All to PC -To transfer all the pictures on the memory card to your computer, press OK then Start. (Your printer and computer must be connected with a USB cable.) Quantity 1 (default) to 99 The number of copies that print. Print Size 2 x 3 3.5 x 5 4 x 6 (default) 4 x 7 5 x 7 4 x 12 8 x 10 8.5 x 11 or A4 If the selected copy size is smaller than the paper in the paper tray, the printer automatically arranges the pictures to best fit the paper size. Plain Paper Quality Normal (default) Good quality output; prints faster than Best. Best The highest quality. Draft The fastest print speed. Photo Paper Quality Automatic (default) The printer detects when you load photo paper and sets Best quality automatically. Printing Pictures Print Photos Option Settings Description Color Color (default) Prints full color. Black & White Prints black and white (gray scale). Scene Balance On (default) Off Adjusts the image brightness to correct for underexposure and reduces the variation in contrast in different areas of the picture. Add Date to Prints No (default) Yes Prints the date of the picture(s) (the date the picture was taken or last edited) in a corner of the print. Save as Defaults No (default) Yes To save settings as the new default, press OK, select Yes, then press OK. Printing pictures from a memory card Types of memory cards Printing a picture using the default settings Your printer accepts the following memory cards: • SD Card • SDHC Card • MMC Card •Memory Stick • Variations of the memory cards listed above that require an adapter (for example, MEMORY STICK Duo, miniSD, and microSD) IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer. If you use the default settings, one 4 x 6 in. /101 x 152 mm picture is printed. To print a picture: 1. Load photo paper with the logo side facing up (see Loading photo paper, page 9), and move the left paper-edge guide until it touches the paper. KODAK ESP 3200 Series All-in-One Printer 2. Insert the memory card into the memory card slot. MM Home memory card slot left paper-edge guide 3. Press or to display the picture you want to print. 4. Press Start to begin printing. IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing. Printing pictures using non-default photo options To print pictures with options other than the default settings (such as a different print size, black-and-white instead of color, or a date on the print): 1. Load photo paper with the logo side facing up (see Loading photo paper, page 9), and move the left paper-edge guide until it touches the paper. MMC Home memory card slot left paper-edge guide 2. Press Back. 3. If necessary, use the navigation buttons to select View and Print Photos. 4. Press OK. Printing Pictures 5. Press to select the option you want to change (for example, Quantity, Print Size, Color, Scene Balance, or Add Date to Print). Printing tagged pictures 6. Press to change the selection. 7. Repeat steps 5 and 6 for each option you want to change. 8. When you are done changing options, press to select View Photos, then press OK. 9. Insert the memory card into the memory card slot. 10. Press or to select the picture you want to print, then press OK. A check mark on the LCD indicates the picture is selected. NOTE: To deselect the picture, press OK again. 11. To select additional pictures, press or until the picture is displayed, then press OK. 12. When you are done selecting pictures, press Start to begin printing. IMPORTANT: To prevent loss of data from your memory card, do not remove it from the printer while printing. Some digital cameras let you tag (or “mark”) pictures on the memory card for printing. This creates a tag that is recognized by the printer. If you choose to print tagged pictures, they will be printed according to the default settings on your printer (unless otherwise specified by the tag from the camera). NOTE: Refer to your camera user guide to determine whether your camera supports tagged (also “marked” or “DPOF”) functionality. To print tagged pictures: 1. Load photo paper with the logo side facing up (see Loading photo paper, page 9), and move the left paper-edge guide until it touches the paper. KODAK ESP 3200 Series All-in-One Printer 2. Insert the memory card into the memory card slot. MM Home memory card slot left paper-edge guide 3. When the “Print tagged images?” message appears, press Start. Printing To print a panoramic picture, load 4 x 12 in. / 101 x 305 mm paper, or US ...
Эта инструкция также подходит к моделям:Принтеры - ESP 3260 (1.9 mb)
Принтеры - ESP 3250 (1.9 mb)
Принтеры - ESP 1.2 (1.9 mb)
Принтеры - ESP 3.2 (1.9 mb)