Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The FC1 and FC2 cartridges are drop-in cartridges that provide convenience and ease of use. The FC1 cartridge will process 200 rolls of 135-24 film; the FC2 cartridge will process 1000 rolls of 135-24 film. The cartridges and tablets are part of Kodak’s systems approach that enables users of other manufacturers’ minilabs to provide customers with high-quality film processing in Kodak chemicals. KODAK Negative Film Processing KODAK Negative Film Processing Cartridge FC1 and Shipping Corrugate Cartridge FC2 and Shipping Corrugate ©Eastman Kodak Company, 2005 OBTAINING THE CHEMICALS Catalog numbers are as follows: Product Min/Mult Order Qty CAT Number KODAK Negative Film Processing Cartridge FC1 2 801 7519 KODAK Negative Film Processing Cartridge FC2 2 867 2701 KODAK Rinse Tablets* 4 191 3110 KODAK Negative Film FC Tank Developer 1 833 9723 KODAK Negative Film FC Tank Bleach 1 107 2024 KODAK Negative Film FC Tank Fixer 1 813 4421 KODAK Negative Film FC Tank Rinse 3 872 4791 *Used in water reservoir on processor SAFE HANDLING OF PHOTOGRAPHIC CHEMICALS Handle all chemicals carefully. When you mix solutions, wear goggles or a face shield, a protective rubber apron, and protective gloves made with neoprene or nitrile rubber. Clean protective clothing after use to remove any chemical residue that can cause contamination. For more information about potential health hazards and safe handling of specific Kodak chemicals, see the label and the Material Safety Data Sheet (MSDS) for the chemical. Consult the MSDS for regional contact information. MSDS copies are available at the Kodak website at CONVERTING TO THE KODAK NEGATIVE FILM PROCESSING CARTRIDGES No processor adjustments are required to use KODAK Negative Film Processing Cartridges FC1 and FC2. These cartridges are designed to mix and replenish on top of existing solution. Use the same processor settings that you use with your current chemical cartridge. Standard conditions are shown in Figure 1 on page 3. Preparing Fresh Working Tank Solutions Use the following Kodak chemicals to prepare fresh working tank solutions: Developer Tank (N1) Use KODAK Negative Film FC Tank Developer CAT No. 833 9723. Each kit makes 5.2 litres. Two kits are required for the FP363SC processor. Three kits are required for the FP563SC processor. Follow the directions in the following table: Step FP363SC Processor FP563SC Processor 1 Mix 2 bottles of developer Part A with 2 litres of water in mixing bottle. Add solution to processor developer (N1) tank. Add 4 litres of water to processor developer (N1) tank. Then mix 3 bottles of developer Part A with 2 litres of water in mixing bottle. Add solution to processor developer (N1) tank. 2 Mix 2 bottles of developer Part B with 2 litres of water in mixing bottle. Add solution to processor developer (N1) tank. Mix 3 bottles of developer Part B with 2 litres of water in mixing bottle. Add processor developer (N1) tank. 3 Mix 2 bottles of developer Part C with 2 litres of water in mixing bottle. Add processor developer (N1) tank. Mix 3 bottles of developer Part C with 2 litres of water in mixing bottle. Add processor developer (N1) tank. 4 Position tank level gauge on processor developer (N1) rack. Add water to N1 level mark (about 2.3 litres). Position tank level gauge on processor developer (N1) rack. Add water to N1 level mark (about 2.4 litres). Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 Bleach Tank (N2) Use KODAK Negative Film FC Tank Bleach, CAT No. 107 2024. Each kit makes 3.6 litres of tank bleach solution. One kit is required to prepare the bleach tank in either the FP363SC processor or the FP563SC processor. Add the contents of 1 bottle to the empty bleach (N2) tank. Position the tank level gauge on the bleach (N2) tank rack, and add water to the N2 level mark on the gauge. For faster warm-up, use water close to operating temperature (31 to 41°C [88 to 106°F]). Fixer Tanks (N3-1 & N3-2) Use KODAK Negative Film FC Tank Fixer, CAT No. 813 4421. Each kit makes 3.6 litres of tank fixer solution. One kit is required to prepare each fixer tank in either the FP363SC processor or the FP563SC processor (two tanks per machine). Add the contents of 1 bottle to each empty tank (N3-1 and/or N3-2). Position the tank level gauge on the fix tank rack (N3-1 or N3-2), and add water to the N3-1 or N3-2 level mark on the gauge. For faster warm up, use water close to operating temperature (31 to 41°C [88 to 106°F]). Figure 1 Cartridge Chemistry CN-16S Process Cycle with KODAK Negative Film 7.5 (6.75)5 (4.5) Replenisher Negative Film Rinse N4-R Negative Film Replenisher Developer N1-RB Negative Film Fixer Replenisher N3-R Negative Film Developer Replenisher N1-RA 15 (13.5) Negative Film Bleach Replenisher N2-R FC1 Cartridge Replenishment Rate mL/135-24 roll (mL/M) Time min:sec Temperature C ( F) 1 Rinse N4-3 RinseDeveloper FixerBleach Fixer Rinse N1 N2 N3-1 N3-2 N4-1 N4-21 0:70 to 0:70 to 0:70 t...
Эта инструкция также подходит к моделям:Принтеры - FC2 (309.64 kb)