Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Setting Up the Wireless (Wi-Fi) Connection 4. If the name of your network is: Listed Not Listed Press to select your network, then press OK. Make sure your wireless router is turned on and within range. If your wireless router does not broadcast its SSID: a. Press to select Unlisted network, then press OK. b. Use the LCD keyboard to enter your network name. c. Select WEP or WPA/WPA2 as required for your network's security setup, then press OK. 5. If your network has security enabled, use the LCD keyboard to enter your security string. 6. When the confirmation message appears, press OK. If the printer is successfully connected, the Wi-Fi status light should be on. If you are unable to connect your printer, go to 7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup. Connecting to a WPS wireless router 1. Press Home. 2. Press to select Network Settings, then press OK. 3. With WiFi Setup Wizard selected, press OK. NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard. 4. With WPS Connect selected, press OK. 5. Select one of these two methods of connecting: IMPORTANT: Before you press OK on the printer, make sure you know where the router's button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router manufacturer’s documentation for more information. Pressing a Button Entering a PIN a. With Push Button Configuration selected, press OK. b. Press or select the WPS button for your wireless router. NOTE: You will have two minutes to press or select the WPS button. It may be a button on the device or a virtual button in the device’s software. a. Press to select Generate WPS PIN, then press OK. b. In your wireless router’s software, locate the PIN screen. c. Enter the PIN you received from the LCD into the PIN screen. 6. When the confirmation message appears, press OK. If the printer is successfully connected, the Wi-Fi status light should be on. If you are unable to connect your printer, go to 7. When the printer is successfully connected, install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup. 3 3 Setting Up the Ethernet Connection Before you connect You need to: • Have a functional Ethernet network that includes a router, switch, or hub with an Ethernet port. • Have a Category 5 (or higher) Ethernet cable. • Temporarily disable your firewall until the printer is successfully installed and communicating. Connecting to an Ethernet network 1. Connect the Ethernet cable into the Ethernet port on the back of the printer. 2. Connect the other end of the Ethernet cable into an available Ethernet port on your router, switch, or hub. 3. Install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup. Eastman Kodak Company Rochester, NY 14650 © Eastman Kodak Company, 2009 Kodak is a trademark of Eastman Kodak Company. Specifications subject to change without notice. P/N 1K5857 (FreeText) 1K5857 October 2009 ...
Эта инструкция также подходит к моделям:Принтеры - 1K5857 (403.88 kb)