Оценок - , средний балл:
(
)
)
Производитель: Konica Minolta
Размер: 1.42 mb
Название файла: 333d1e78-9169-4285-b83f-af329ddb82b1.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
In the Energy Saving Mode the printer will not use its fusing lamp and “Energy Save Mode” will be displayed on the LCD. If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 240 minutes. For details, see page 1.19. Statement The Konica 7013 carries the CE mark. This indicates that the machine complies to EN55022 1998 (Class B), EN55024 1998, EN61000-3-2 1995 +A1 +A2, and EN61000-3-3 1995 in accordance with EEC 89/336/EEC. In addition the machine has been safety tested to IEC60950 1991 +A1 +accordance with EEC directive 73/23/EEC. The Konica 7013 is a Class 1 LED product conforming to IEC60825- This equipment is suitable for connection to analog PSTN telephone conform to the signaling requirements of CTR21. In case of a problem for further information please contact your supplier. Before using fax Where to set up your fax Follow these guidelines when setting up 50 - 89.6 F ( 10 - 32 C) Away from direct sunlight To avoid overheating, set up your fax machine away from direct sunlight or a heater. Level, and vibration-free To avoid damage to the machine or injuries, set the fax machine up in a level, vibration-free location. Avoid extreme high / low temperature Use your fax machine within the temperature range of 10. C to 32. C (50. F to 89.6. F). Away from a television or radio Many appliances and office equipment, including televisions, radios, copy machines, air conditioners and computers, can generate electronic noise that can interfere with the operation of your fax machine. Clean Dust buildup can damage your fax. Periodically clean your fax machine as described in the operating instructions. Do not use a dust cover, which can cause damaging overheating. Near a phone jack Your fax machine uses a standard (modular) telephone jack, also known as an LJU. Space around the fax machine To ensure proper ventilation and easy operation, set up the machine in an area that meets the minimum requirements for clearance as illustrated below. 15 cm (5.9 inches) 25 cm (9.8 inches) 40 cm (15.7 inches) 40 cm (15.7 inches) 60 cm (23.6 inches) Power requirements Plug in the power cord Plug the power cord carefully and wall outlet. Do not leave any portion of the electrical cord’s metal plugs exposed. Doing so could cause a fire and poses a risk of electrical shock. Do not share an extension cord connector with other plugs It can cause electrical shock. AC 230V Do not share an outlet with a largeappliance High-consumption appliances such as a refrigerator or air conditioner can cause “draw-downs” which could damage your fax machine. 230 VAC outlet Use a standard three-pronged 230 V electrical outlet to power your fax machine. Using any other electrical outlet will cause damage to your fax. For domestic use only Never use your fax machine outside the country in which you purchased it. Doing so may violate telecommunication and safety regulations of that country, and variations in electrical and telephone standards can cause poor performance and damage to your fax. General Precautions Never disassemble your Disassembling your fax machine can cause serious injury to you and damage to your fax. If service is required, call your authorised Konica dealer. Keep away from liquids Keep liquids and metal pins or other objects away from your fax machine. If something falls into the fax machine, remove the plug from the outlet, and call your authorised Konica dealer. Never handle your fax machine orpower cord with wet hands Never touch your fax machine or power cord if your hands are wet. During electrical storms, disconnectthe plug from the outlet Electrical storms can cause electrical shock or damage to the fax machine. Do not put furniture onthe power cord Do not put anything on cord, and do not route the power carpets. Doing so can damage the power and can cause fire or electrical shock. Avoid temperature fluctuations Sudden changes in temperature can cause damaging condensation to form inside your fax machine. Allow clearance around the outlet Don’t stack boxes or furniture around the outlet. Use caution when carrying the fax Lift and carry the fax machine as described in your operating instructions. Some fax machines require two people to safely and properly carry. Use supplies manufactured specifically for Konica fax machines Using toner cartridges and other supplies that are not manufactured specifically for Konica machines may affect the operation of your unit. Storing and To avoid damage to your fax and to assure the follow these guidelines when Store the cartridge Store the cartridge at a constant temperature to 95. F). To avoid dew do not store cartridges in locations of temperature and humidity. Do not stand the cartridge on its end itupside down. Do not open the protective bag of the cartridge areready to install the cartridge. Do not store cartridges in areas of: • Direct sunlight • Dusty con...