Оценок - , средний балл:
(
)
)
Производитель: Konica Minolta
Размер: 4 mb
Название файла: ecd493e5-69bd-4e85-86e4-61195ca6b471.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
226 Hard Disk Kit CompactFlash If you install a CompactFlash card, the followings can be performed: – Collate printing – Fonts forms download – User Authentication/Account Track – Direct printing (including the use of PageScope Direct Print) ..• Only CompactFlash cards with a capacity of 256 MB, 512 MB, 1 GB, 2 GB or 4 GB can be used. ..• The job printing/saving function is not available with a CompactFlash card. These functions require that an optional hard disk kit be installed. ..• A hard disk kit and a CF adapter cannot be installed simultaneously. Installing the CF adapter and CompactFlash card Note If the installed CompactFlash card is used with a device other than this printer, such as a computer or digital camera, the card is automatically formatted and all of its data is deleted. Note It is very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by their edges only. CompactFlash 227 1 Turn off the printer and disconnect the power cord and interface cables. 2 Using a screwdriver, remove the screw. Then, slide the rear cover to the right and remove it. 3 Using a screwdriver, loosen the seven screws. (Do not remove them from the printer.) 228 CompactFlash 4 Slide the panel slightly to the right and lift it off the printer. 5 Plug the cable on the CF adapter into the connector on the controller board. 6 Insert the three mounting pins on the CF adapter into the holes in the controller board to mount the CF adapter onto the controller board. CompactFlash 229 7 Fully insert the CompactFlash card into the appropriate slot. When the CompactFlash card is correctly inserted, the button on the top side of the slot (circled in the illustration) slightly pops out. ..• Before removing the CompactFlash card, press in this button. 8 Reinstall the panel and tighten the seven screws. 9 Attach the rear cover. 10 Reconnect all interface cables. 11 Reconnect the power cord, and turn on the printer. 12 Declare the Memory card in the Windows printer driver (Properties/Configure tab). 230 CompactFlash Lower Feeder Unit You can install up to one optional lower feeder unit (Tray 3). The lower feeder unit increases your printer’s media feed capacity by 500 sheets. Kit Contents • Lower feeder unit with a tray (500-sheet capacity) Lower Feeder Unit Installing a Lower Feeder Unit Note Since consumables are installed in the printer, be sure to keep the printer level when moving it in order to prevent accidental spills. 1 Turn off the printer and disconnect the power cord and interface cables. 2 Prepare the lower feeder unit. ..• Be sure to place the lower feeder unit on a level surface. 3 Open the right side cover of the lower feeder unit. ..• The right side cover of the lower feeder must be opened before the feeder can be installed onto the printer. Lower Feeder Unit 4 With another person’s help, place the printer on top of the lower feeder unit, making sure that the positioning pins on the lower feeder unit correctly fit into the holes on the bottom of the printer. 37 kg 81.5 lbs WARNING! This printer weighs approximately 37kg (81.5lb) when it is fully loaded with consumables. The printer must be lifted by two people. 5 Close the right side cover of the lower feeder unit. 6 Reconnect all interface cables. Lower Feeder Unit 7 Reconnect the power cord, and turn on the printer. 8 Declare Paper Source Unit 3 in the Windows printer driver (Properties/ Configure tab). Lower Feeder Unit Appendix Technical Specifications Printer Type Desktop Tandem Full Color A4 laser beam printer Print system Electro photographic Printing System Exposure system 4 laser diode and 1 polygon mirror Developing system Mono-component SMT Resolution 600 dpi . 600 dpi . 4 bits First print Simplex Monochrome/Full color: 14.5 seconds for A4 or Letter (plain paper) Duplex (double-sided) Monochrome/Full color: 25 seconds for A4 or Letter (plain paper) Print speed Simplex Monochrome/Full color : 24/24 page per minutes for A4 or Letter (plain paper) 25/25 page per minutes for A4 or Letter (plain paper) Duplex (double-sided) Monochrome: 24/24 page per minutes for A4 (plain paper) 25/25 page per minutes for Letter (plain paper) Media sizes Tray 1 (Manual feed tray) Paper width: 92 to 216 mm (3.6 to 8.5") Paper length: 148 to 356 mm (5.8 to 14.0") Tray 2 Paper width: 92 to 216 mm (3.6 to 8.5") Paper length: 148 to 297 mm (5.8 to 11.7") Tray 3 (Optional) B5 (JIS) - Legal Technical Specifications Paper/Media • Plain paper (60 to 90 g/m2; 16 to 24 lb bond) • Recycled (60 to 90 g/m2; 16 to 24 lb bond) • Transparencies • Envelopes • Letterhead • Label • Thick 1 (91 to 150 g/m2) • Thick 2 (151 to 210 g/m2) •Postcard • Glossy 1 (100-128 g/m2) • Glossy 2 (129-158 g/m2) Input capacity Tray 1 (Manual feed tray) Plain/Recycled paper:100 sheets Envelope: 10 envelopes Label/Postcard/Thick 1/Thick 2/Glossy...