|
Инструкция по эксплуатации HP, модель 51641A
Перейти к скачиванию
Фрагмент инструкции
Select the corresponding ink dispenser (cyan, magenta or yellow). Remove the scabbard from the dispenser tip. Tilt the cartridge forward so that you can insert the dispenser tip into the correct fill hole without dripping (Illustration 2). Insert the dispensertip into the cartridge as far as it will go. Bring the cartridge and dispenser back to the vertical position. Gently squeeze the dispenser bottle while slowly drawing the tip upward so that the ink saturates all areas of the foam sponge inside the ink chamber (Illustration 3). Illustration 3 Illustration 2 6. Stop dispensing ink as soon as ink starts to overflow from the fill hole. Release the pressure from the bottle so that a small amount of the excess ink is drawn back into the bottle 1. Remove the dispenser from the cartridge. Recap the dispenser and save for future use. 8. Use the cotton wipe to dry any overflow from around the fill hole. 9. Repeat the fill procedure with the other two colors so that all three ink chambers are topped off. There is no need to reseal the fill holes. Ink will not leak from them. IF YOU HAVE ANY QUESTIONS OR ENCOUNTER ANY DIFFICULTY IN USING THIS PRODUCT, PLEASE CONTACT: RE PEA T-ij-TYPE MAA/UFXCTUR/A/G CORPORA T/O/V ES TA BL /SHED -/93Ï 665 Stale Highway 23 • Wayne, NJ 07470-6892 U.S. A. • (973) 696-3330 • (800) 288-3330 Fax: (973) 694-7287 • Email: hdp@repealo(ype.com Hewlett-Packard is a trademark ofHewlett-Packctrd Compam ©1998Repeat-O-Type A innifactiiting Corporation. 51641ARefill Instr. 12/97...
Напишите ваш отзыв об устройстве
|
|