Оценок - 4, средний балл: 4.5 ( )

Производитель: Ricoh Размер: 5.28 mb Название файла: 547d7b35-1f31-9e04-1d66-08fabbb448d2.pdf Язык инструкции:

Make sure to select the frame type same as the file server. . When you select “Auto Select”, the frame type detected upon startup is automatically set. Therefore, your desired frame type may not be selected by the system, which supports multiple frame types. Select the desired frame type. . To use the machine in a pure IP environment on NetWare 5/5.1, select [Effective] for TCP/IP in step D. Configuring the Network A Make sure that the [Network] key is selected, and then press the [NW Frame Type] key. B Select the Frame Type, and then press the [OK] key. When using the IEEE 1394 Interface (option) Note . When you use the IEEE 1394 Interface, you cannot use the DHCP. You must set the fixed IP address. . Be sure to set the IP over 1394 to “Effective”. The default is set to “Effective”. Reference When you use parallel printing, see the Printer Reference. A Make sure that the [Network] key is selected, and then press the [IEEE 1394] key. B Press the [IP Address] key. C Use the number keys to enter the IP address, and then press the [OK] key. D Press the [Sub-net Mask] key. E Use the number keys to enter the Subnet Mask, and then press the [OK] key. F Press the [IP over 1394] key. G Make sure that [Active] is selected, and then press the [OK] key. Note . If [Active] is not selected, press the [Active] key, and then press the [OK] key. Basics When using the Wireless LAN Interface (option) in 802.11 Ad hoc Mode Make sure to set 802.11 Ad hoc Mode, when SSID is necessary in Ad hoc Mode. If encrypted transmission is used, make sure to set WEP after SSID. Note . You can set the 802.11 Ad hoc Mode from your computer when setting SSID (Network Name). . The network administrator must check the environment and set the Communication mode, WEP key and SSID correctly. For details on settings, see “Using the IEEE 802.11b (Wireless LAN)” in the Network Printing Guide. . Characters used for setting SSID are which are case- sensitive. You can enter up to 32 characters. . You can also set 802.11 Ad hoc mode from the Web browser. For details on settings, see the Network Printing Guide. A Make sure that [Network] is selected, and then press [LAN Type] key. B Press the [IEEE 802.11b] key, and then press the [OK] key. C Press the [IEEE 802.11b] key. D Press the [Communication Mode] key. E Press the [802.11 Ad hoc] key, and then press the [OK] key. F Press the [Channel] key. G Use the number keys to enter the channel to be used, and then press the [OK] key. H Press the [SSID Setting] key. I Press [Enter SSID] and enter the SSID, and then press the [OK] key. J Press the [OK] key. Configuring the Network When using the Wireless LAN Interface (option) in Ad hoc Mode Note . You can set Ad hoc Mode when you do not set SSID (Network Name) from your computer. In this case, setting SSID from this machine is ineffective. . The network administrator must check the environment and set the Communication mode and Channel correctly. For details on settings, see “Using the IEEE 802.11b (Wireless LAN)” in the Network Printing Guide. . Characters used for setting SSID are which are case- sensitive. You can enter up to 32 characters. . You can set the Ad hoc mode from the Web browser. For details on settings, see the Network Printing Guide. A Make sure that the [Network] key is selected, and then press the [LAN Type] key. B Press the [IEEE 802.11b] key, and then press the [OK] key. C Press the [IEEE 802.11b] key. D Press the [Communication Mode] key. E Press the [Ad hoc] key, and then press the [OK] key. F Press the [Channel] key. G Use the number keys to enter the channel to be used, and then press the [OK] key. Basics When using the Wireless LAN Interface (option) in Infrastructure Mode Note . The network administrator must check the environment and set the Communication mode, WEP key, and SSID correctly. For details on settings, see “Using the IEEE 802.11b (Wireless LAN)” in the Network Printing Guide. . Enter the WEP key in hexadecimal. You can enter 10-digits for 64-bit data or 26-digits for 128-bit data. . Characters used for setting SSID are which are case- sensitive. You can enter up to 32 characters. . You can also set the Infrastructure mode from the Web browser. For details on settings, see the Network Printing Guide. A Make sure the [Network] key is selected, and then press the [LAN Type] key. B Press the [IEEE 802.11b] key, and then press the [OK] key. C Press the [IEEE 802.11b] key. D Press the [Communication Mode] key. E Press the [Infrastructure] key, and then press the [OK] key. F Press the [SSID Setting] key. G Press the [Enter SSID] key. H Enter the SSID, and then press the [OK] key. I Press the [OK] key. J Press the [WEP (Encryption) Setting] key if setting is required. K Press [Enter WEP key] and enter the WEP key, and then press the [OK] key. L Press the [Active] key. M Press the [OK] key. Configuring the Network E EEEEPress the [Exit] key. F FFFFPrint the list of ent...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: