Оценок - 5, средний балл: 5
(
)
)
|
Фрагмент инструкции
Note . Default: Off 2. Check Copy Counter You can check the number of copies made under each user code. 3. Print Counter List You can print counter lists. 4. Reset Counter You can check the number of copies made under each user code. You can also reset each user code's counter to 0. User Tools (Copier Features) Menu Description 5. Clear all User Codes (5. Clr All User Codes) You can clear all user codes. Note . The number of copies made under the old code is added to that made under the new user code. . The number of copies made under the deleted code is also deleted. 6. Reset All Counters You can reset each user code's counter to 0. 7. Program User Code You can register user codes. Note . Up to 10 user codes (8 digits or less) can be registered. 8. Change User Code You can change user codes. Note . The number of copies made under the old code is added to that made under the new user code. 9. Delete User Code You can delete user codes. Note . The number of copies made under the deleted code is also deleted. 5. Remarks Do's and Don'ts R CAUTION: • Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. Important . Make sure the remaining memory space is 100%, before you unplug the power cord. . While the machine is unplugged, you can neither send nor receive a fax. Reference For details, see the Facsimile Reference manual. • When you use this machine for a long time in a confined space without good ventilation, you may notice an odd smell. To keep the workplace comfortable, we recommend that you keep it well ventilated. • Do not touch areas on or around the fusing unit. These areas get hot. • After making copies continuously, you may feel the exposure glass is heated. This is not a malfunction. • You may feel warm around the ventilation hole. This is caused by exhaust air, and is not a malfunction. • Do not turn off the operation switch while copying or printing. When turning off the operation switch, copying with memory and printing continue. However, scanning of copy originals is interrupted. • The machine might fail to produce good copy images if condensation forms inside the machine due to temperature change. • Do not open the covers of the machine while copying or printing. If you do, misfeeds might occur. • Do not move the machine while copying or printing. • If you operate the machine improperly or a failure occurs, your settings might be lost. Be sure to take a note of your machine settings. • Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of machine settings, and use of the machine. Remarks Where to Put Your Machine Machine Environment Your machine's location should be carefully chosen because environmental conditions greatly affect its performance. Optimum environmental conditions R CAUTION: • Keep the equipment away from humidity and dust. Otherwise a fire or an electric shock might occur. • Do not place the equipment on an unstable or tilted surface. If it topples over, it could cause injury. R CAUTION: • Before moving the equipment, be sure to pull all four handles fully out. Not doing this may result in an injury, such as getting your fingers pinched. After moving the equipment, return the four handles to their original positions. • When the optional paper tray unit is installed, do not push the upper part of the main unit horizontally. If the paper tray unit becomes detached from the main unit, this could cause an injury. R CAUTION: • If you use the equipment in a confined space, make sure there is a continuous air turnover. • Temperature: 10 – 32°C (50 – 89.6°F), humidity 54% at 32°C, 89.6°F • Humidity: 15 – 80%, temperature 27°C, 80.6°F at 80% • A strong and level base. • The machine must be level within 5mm, 0.2" both front to rear and left to right. • To avoid possible build-up of ozone, be sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. Environments to avoid • Locations exposed to direct sunlight or strong light (more than 1,500 lux). • Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes might cause condensation within the machine.) • Locations close to such machines generating ammonia such as diazo copy machines. • Places where the machine might be subjected to frequent, strong vibrations. • Dusty areas. 60 • Areas with corrosive gases. Where to Put Your Machine Power Connection R WARNING: • Only connect the machine to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. R WA...
Эта инструкция также подходит к моделям:Принтеры - aficio 1013 (2.78 mb)