Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Tel: 201-708-1400 866-712-5663 Fax: 201-704-1104 0609 GENESIS 2006 SHOWN 2 To assure proper record keeping, please retain this information for future use. DATE PURCHASED ____________________________ SERIAL # _____________________________________ DISTRIBUTOR NAME __________________________ PHONE NUMBER ______________________________ CITY, STATE __________________________________ The GENESIS THAWING SYSTEMS incorporate water bath technology with the latest engineering to enable the machine to provide plasma thawing in a minimum of time. The unique, water resistant electronic key pad permits the operator to easily monitor and control the thawing activity. The compact design of the GENESIS 2002/2006. saves precious bench top space. It is easy to operate, keep clean and maintain. The GENESIS 2002/2006. sets up in minutes and is ready to use. The GENESIS 2002/2006. comes with 1000 plasma thawing bags, thawing bag dispenser, bag holder(s), LABath CLEANTM, reference thermometer, and two special plasma thawing bag weights. Optional accessories are also available. We are certain that you will be pleased with your new GENESIS 2002/2006. plasma thawing water bath system. If you have any questions, please call : GenesisBPS, LLC at 866-712-5663 3 CONTENTS page 1. UNPACKING ........................................................ 5 2. TO THAW BLOOD PRODUCTS ........................ 5 3. TO REMOVE A THAWED BAG ........................ 9 4. TO MAINTAIN THE DEVICE IN THE READY TO THAW STATUS .............................. 9 5. TO CLEAN THE BATH OR TO ADD WATER .. 10 6. CONTROL PANEL AND INDICATORS ............ 12 7. TROUBLESHOOTING GUIDE ........................... 15 8. SPECIAL FEATURES .......................................... 18 9. UNIQUE SAFEGUARDS ..................................... 18 10. SPECIFICATIONS ............................................... 19 11. ORDERING/RETURN INFORMATION ............ 20 12. WARRANTY ....................................................... 22 4 1. UNPACKING 1.1 The following is supplied with your GENESIS 2002/2006. unit. Control Unit Water Bath Thawing Bag Dispenser Plasma Overwrap Thawing Bags (1000/Box) Plasma Bag Holder LABath CLEANTM Reference Thermometer Thawing Bag Weights User's Manual Optional Accessories : Additional Bag Weights The above items may be purchased from : GenesisBPS, LLC 866-712-5663 2. TO THAW BLOOD PRODUCTS 2.1 Place the unit on a flat, sturdy surface. 2.2 Fill bath with water up to the slotted line on the front of the stainless steel shroud. This level will ensure proper thawing operation. No bags should be in the bath and the unit should be placed in the down position when filling the bath. Check water level daily. If the water level is too low, the GENESIS 2002/2006. low water level sensing switch will make the unit inoperable (when the unit is plugged into the power supply). An alarm will sound and the ADD WATER 5 indicator will light. To correct this situation, fill bath with water as explained above. Add 2 ml of LABath CLEANTM each time the water is changed to control bacterial and algae growth. The bath cleaning agent also helps to prevent the formation of turbidity and odor. 2.3 Plug the device into a 115 volt AC outlet. For GENESIS 2002., a dedicated 10 Ampere outlet is needed. For the GENESIS 2006., a dedicated 15 Ampere outlet is needed. The outlet must be properly grounded. IMPORTANT : DO NOT use sharp instruments (pen, pencil, etc.) on the key pad area - it will cause damage to the instrument. 2.4 Turn on the POWER SWITCH on the left panel. 2.5 Start the unit by pressing the POWER key located on the control panel. a. The default SET TEMP is 37 °C. When switching on the unit this temperature will be displayed in the SET TEMP window, as the desired temperature, along with the actual WATER TEMP of the bath. The bag timers will display zeros. b. If the water temperature is less than the set temperature (37 °C) then heating of the water will begin automatically - the HEAT indicator will light. In addition, the HEATING indicator will light, indicating the heater is drawing power. When the bath water reaches the set temperature, HEATING indicator will go off. When the bath water cools, HEATING indicator will go on again, indicating water is being heated. This cycle continues, ensuring accurate water temperature. 6 c. To change the default SET TEMP : You can adjust this temperature within the range of ambient to + 56 °C, in one degree increments. To adjust, press the SET TEMP key - then press the numeric key pad to indicate the temperature desired. All keys must be pressed within 5 seconds of each other. The display should now show the new SET TEMP. When the SET TEMP is same as the WATER TEMP, the bath is ready to be used for thawing. d. Place the frozen product in slot marked 1 on the Plasma Bag Holder. It is recommended that frozen plasma be placed into a plasma overwrap thawing bag. This should prevent plasma from getting into the bath, ...
Эта инструкция также подходит к моделям:Принадлежности для ванной - 2006 (218.13 kb)