Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
AND ALARM HORN PATTERNS your family with whole-home safety. All ONELINK® Alarms communicate with tricity fails, provided the batteries are fresh and correctly installed. Units are Installing Smoke Alarms in Single-Family Residences Read “Recommended Locations For Smoke Alarms” and “Locations to Avoid For Smoke Alarms” before you begin installation. each other without wires or connectors. When one Alarm sounds, they all easy to install, and do not require professional installation. AC Power DC Power sound. This provides your family with an earlier warning of potential danger, The National Fire Protection Association (NFPA), recommends one Smoke WIRELESS ONELINK® AC POWERED Tools you will need: Make sure the Alarm is not receiving excessively noisy power. Examples of noisy power could be major appliances on the same circuit, power from a generator or solar power, light dimmer on the same circuit or mounted near fluorescent lighting. Excessively noisy power may cause damage to your Alarm. • Needle-nose pliers • Standard Flathead screwdriver • Phillips screwdriver. All Models AC powered Smoke Alarms: Can be interconnected so if one unit senses and gives you more time to react. Alarm on every floor, in every sleeping area, and in every bedroom. In new smoke, all units alarm. They do not operate if electricity fails. SMOKE ALARM WITH BATTERY BACK-UP construction, the Smoke Alarms must be AC powered and interconnected. Input: 120V AC ~, 60Hz, 0.09A Normal Operation Constant Green LED Green LED Off The communication distance (range) between any two ONELINK® Alarms is AC with battery (DC) back-up: will operate if electricity fails, provided the See “Agency Placement Recommendations” for details. For additional cover- typically 50 feet (15 meters) inside of a home. Some features of a home, such batteries are fresh and correctly installed. AC and AC/DC units must be No Audible Alarm No Audible Alarm age, it is recommended that you install a Smoke Alarm in all rooms, halls, as the number of floors, number/size of rooms, furniture and types of building installed by a qualified electrician. storage areas, finished attics, and basements, where temperatures normally materials used may reduce the range of the Alarms. Examples include: THE PARTS OF THIS SMOKE ALARM Test Condition Constant Green LED Green LED Off remain between 40° F (4° C) and 100° F (38° C). Make sure no door or other ONELINK® Smoke Alarms with battery (DC) back-up: Interconnects with suspended ceilings, ductwork, large metallic appliances (refrigerators) and obstruction could keep smoke from reaching the Smoke Alarms. all ONELINK® enabled Smoke and Smoke/CO Alarms without wires or con- Rapidly Flashing Rapidly Flashing metal studs. A feature of ONELINK® Alarms is that they operate as a mesh The Mounting Bracket: nectors, so when one alarm sounds, they all sound. Will operate if electricity The Parts of This Unit Red LED Red LED network. All Alarms will repeat any alarm signal that is received to all other More specifically, install Smoke Alarms: To remove the mounting bracket from the Smoke fails, provided the batteries are fresh and correctly installed. Units are easy to ONELINK® Alarms. Interference from structural conditions can be overcome Alarm base, hold the Smoke Alarm base firmly 1 Mounting Bracket Audible Alarm Audible Alarm • On every level of your home, including finished attics and basements. install, and do not require professional installation. by adding additional Alarms to route the wireless signal around obstructions. and twist the mounting bracket counterclockwise. • Inside every bedroom, especially if people sleep with the door partly or Smoke Alarms for Solar or Wind Energy users and battery backup power 2 Mounting Slots Alarm Condition* Constant Green LED Green LED Off The mounting bracket installs onto the junction box. completely closed. systems: AC powered Smoke Alarms should only be operated with true or (Initiating Unit) It has a variety of screw slots to fit most boxes. Rapidly Flashing Rapidly FlashingRed LED Red LED 3 Locking Pins (break out of bracket) • The range and proper operation of any wireless device will vary • In the hall near every sleeping area. If your home has multiple sleeping pure sine wave inverters. Operating this Smoke Alarm with most battery- depending on its surroundings. It is very important that each areas, install a unit in each. If a hall is more than 40 feet long (12 meters), powered UPS (uninterruptible power supply) products or square wave or Alarm is tested individually before and after installation to make install a unit at each end. “quasi sine wave” inverters will damage the Alarm. If you are not sure about 4 Hot (Black) AC Wire Audible Alarm Audible Alarmsure that all Alarms respond properly. • At the top of the first-to-second floor stairway, and at the bottom your inverter or UPS type, please consult with the manufacturer to verify. The Power Connector: 5 Neutral (White) AC Wire The power conn...
Эта инструкция также подходит к моделям:Пожарные сигнализации - 7010 series (600.32 kb)